Xbox 360 Slim 2.5" HDD/SSD adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter that will let you use a standard 2.5" HDD or SSD in a modded Xbox 360 Slim.
- Ocena
- 4,125 / 5
- Polubienia
- 191
- Pobrania
- 1733
- Wydruki
- 7
- Wyświetlenia
- 8066
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Adapter that will let you use a standard (~100mm x 70mm x 7mm) 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug. Includes holes on the back so you can pull this out of the 360 with pliers, and some thumb cutouts up top for easier drive removal.
Print Settings
Printer:
Markforged X7
Rafts:
No
Supports:
No
Resolution:
100um
Infill:
37%
Filament: Markforged Onyx Black
Notes:
Should print fine at 200um layers in PLA, but you may need a smaller layer height for materials like ABS/Nylon for the hexagons to come out nicely. No supports needed. Prints vertically, may need a small brim if you bed adhesion isn't great.
How I Designed This
Designed in Autodesk Fusion 360 using measurements from the original Microsoft branded HDD that came in my 360.