1 / 4
Speedybee Master 5 v2 - DJI O3 Air unit & Walksnail WS-M181 — zdjęcie 1
1 / 4

Speedybee Master 5 v2 - DJI O3 Air unit & Walksnail WS-M181

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rear custom mount to house the Walksnail WS-M181 and DJI O3 Air Unit antenna on the Speedybee Master 5 v2 frame.

Ocena
0 / 5
Polubienia
1
Pobrania
57
Wydruki
0
Wyświetlenia
298
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

A compact, custom rear mount for the Speedybee Master 5 v2 to house a DJI O3 Air Unit antennae and the Walksnail WS-M181 GPS unit.

Printed on/using:

Layer height 0.08mm using “Avoid crossing walls” to reduce stringing, using 100% infill. Designed so that no supports are required.

Worked out great, using the JST-SH1.0 cable for the WS-M181 and by feeding through at 90 degrees to fit through the hole. The DJI antenna wires need to be fed through staggered or one-by-one and the default DJI tube should be a tight push-fit. 

No additional fittings or glue required.

My first shared model!

Tagi