Speedybee Master 5 v2 - DJI O3 Air unit & Walksnail WS-M181
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rear custom mount to house the Walksnail WS-M181 and DJI O3 Air Unit antenna on the Speedybee Master 5 v2 frame.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 57
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
A compact, custom rear mount for the Speedybee Master 5 v2 to house a DJI O3 Air Unit antennae and the Walksnail WS-M181 GPS unit.
Printed on/using:
- Creality K1 https://amzn.to/4fKh0ph
- Overture Electrical Blue TPU https://amzn.to/4c9XgIp
Layer height 0.08mm using “Avoid crossing walls” to reduce stringing, using 100% infill. Designed so that no supports are required.
Worked out great, using the JST-SH1.0 cable for the WS-M181 and by feeding through at 90 degrees to fit through the hole. The DJI antenna wires need to be fed through staggered or one-by-one and the default DJI tube should be a tight push-fit.
No additional fittings or glue required.
My first shared model!