HDD Holder for NAS ITX PC Case by @haydnbao
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches two HDDs instead of a flex PSU in the NAS ITX Case by @haydnbao
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 1695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to start my NAS project with NAS ITX PC case by @haydnbao
https://www.printables.com/de/model/590711-nas-itx-pc-case-with-stackable-expansions
I just wanted to start with two hard drives and didn't want to print the whole lower part of the case. So I designed an HDD holder that can be installed instead on an FLEX PSU (if you use a PICO PSU)
Print the tray twice and glue them to the holder. Check for the right orientation of the holes. Then I installed two HDDs and screwed it in the place of the Flex PSU
For the bottom of the tray, I used a modifier box (120 x 147 x 2 mm) with 20% honeycomb infill and not bottom and top layers (like with the mesh in the original case). I also set the infill angle to 0°.