Jeep Wrangler (YJ) Fender Flare Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recreation of the fender flare nuts on Jeep Wrangler YJs. Designed to take a No.10-3/4" self tapping hex screw
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I am restoring a 1994 Jeep Wrangler YJ and I decided to replace whatever hardware I can as the self tapping screws are a little worse for wear.
Designed to take a No. 10 x ¾" self tapping screw, better to go for stainless steel to minimise corrosion.
Probably best to print in something with a bit of “flex” like PETG.
It also has some liberties taken with the design - the original had four teeth on the bottom but to make it easier to print I omitted these. I intend to use some thin 3M VHB tape on the bottoms to stick them to the fender flares during reassembly.
Edit: Reduced the diameter of the self tapping screw hole by 0.1mm as I wasn't happy with how much bite the thread had on the nut.
Part group: EYJ-205
Part number: J400 4868