1 / 2
Jeep Wrangler (YJ) Fender Flare Nut — image 1
1 / 2

Jeep Wrangler (YJ) Fender Flare Nut

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Recreation of the fender flare nuts on Jeep Wrangler YJs. Designed to take a No.10-3/4" self tapping hex screw

Rating
0 / 5
Likes
11
Downloads
44
Makes
1
Views
186
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

I am restoring a 1994 Jeep Wrangler YJ and I decided to replace whatever hardware I can as the self tapping screws are a little worse for wear.

Designed to take a No. 10 x ¾" self tapping screw, better to go for stainless steel to minimise corrosion.

Probably best to print in something with a bit of “flex” like PETG.

It also has some liberties taken with the design - the original had four teeth on the bottom but to make it easier to print I omitted these. I intend to use some thin 3M VHB tape on the bottoms to stick them to the fender flares during reassembly.

Edit: Reduced the diameter of the self tapping screw hole by 0.1mm as I wasn't happy with how much bite the thread had on the nut.

Part group: EYJ-205

Part number: J400 4868

Onshape Link here

Tags