277 models
01 - Summary A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
A puller tool used to remove the oil sight glass from the 42º or 90º gearbox on a Bell 205, UH-1, or 212 helicopter. The puller has two different size spacers (one thin, one thick) which may or may not need to be used depending on the…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
Fire Shelter Clip for the Bell 205 or UH-1 Helicopter A clip for securing a fire shelter to the storage compartment located at the rear of the center pedestal in the cockpit of a Bell 205 or UH-1 helicopter. Each fire shelter requires two…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…
These strong, reusable plant stakes are designed to help support stems and keep plants upright as they grow. Whether you're dealing with seedlings or mature plants starting to lean under their own weight, these supports offer a clean,…
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
This model is compatible with the lego system.
A grit guard sits in the bottom of your wash bucket in your wash solution. It allows the dirt and debris that gets stuck to your wash sponge/mitt/towel to fall through the grate and rest in the bottom of your bucket preventing…
Originally published here: Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case by tato_713 - Thingiverse This case is for the Samsung A20 phone (models started with a205), for the A20s (a207 models) look here . This case was tested on the…
Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
printed with ankermake m5 in normal mode, 50% infill, support
Deutsche Bundesbahn Guterwagen Gls205 / Gms54 in gauge 1 (1:32). I "borrowed" the roof-shape from the "French Wagon" by dagnall53: https://www.thingiverse.com/thing:2675325 The coupling is a modified version of raby's design:…
User named Weylandyutani from Thingiverse created a simple wall mount for the LEGO 42056 Porsche GT3 RS. It clamps on a pretty strong point on the chassis (see the red arrow on the last picture). Depending on the hardware you'll use to…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
kiteboard handle 2 versions holes 205mm and 170 mm (depending of the brand you got) recommend atleast 1mm thick walls and infill atleast 40% 0.2 layer 0.4 nozzle Print on it its side for the best strength
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
A Gridfinity holder for the Dremel 2050 (Stylo+). Holds both the tool, and the US plug. The plug extends past the top of the holder so unfortunately, nothing can be stacked on top. Also, the holder is a bit taller than the standard size…
Completely reworked from the original, correcting the erroneously offcentred parts, and exporting with a much higher polygon resolution. Narrowed the base posts a little in order to ensure snug fit with OEM part this attaches to. Print…
Since you can't just create a speed tower in the BambuLab Studio, I've made the effort to come up with an object-based solution. :) Actually it's a 3mf exported from SoftFever Fork. You can import it in BambuStudio and select your Printer…
mount for most typical engines like A2212 https://s.click.aliexpress.com/e/_Eu7fG6f or RS2205 https://s.click.aliexpress.com/e/_EvxsxhZ I‘ve made this because RS2205 is sold without mount, screws only PETG 100% infill weight is ~2-3g
Blueprint généré à partir d'une image
This is the EW 160E set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
The CAD file for the following motor: https://www.qsmotor.com/product/10inch-3000w-hub-motor/ 10inch 3000W Hub Motor 1) Motor Type: DC Brushless Hub Motor 2) Version: V2, V3 3) Rated Power: 3000W (maximum 6000W). 4) Voltage Range: 48V,…
Basic set of inserts for 240x205 variant Top and middle inserts are third of the width so you can combine them however you want. Screw inserts are meant to be used together. All inserts have 45° chamfer so you can take them out and for…
cup holder insert for the Mercedes-Benz C-Class (C450T, 2015, W205). Designed to fit perfectly in the center console, providing two bottle/can holders. Available in two versions : With built-in phone holder Without phone holder Drop-in…
Gridfinity Knipex 0205180 combination pliers Kombizange 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
iPhone Dock (iPhone 13 Pro with Rhinoshield Case) for Mercedes C-Class with charging cable. Fits for the cupholder in the center console. Needs to be customized for other cases, phones or cables, as each case or plug has different shapes…
As a dedicated craftsperson, organizing those myriad of tool bits—each crucial for different tasks—can be quite the hassle, especially the ones used so seldomly they seem almost forgettable. To streamline your workspace and ensure every…
Build from Zolee Gaa base block, this is a model to test the temperature from 180 to 205°C (PLA).
I made this tool after getting a used 2018 Sierra Denali that must've been owned by a hamfisted degenerate; all of the cigarette lighter covers had been ripped off and broken. Finding this tool (Dorman 56457) was needed to remove the…
This is a replacement part for Audi wiper arm nut cap, ID 1J0955205A. For reference, the maximum outer diameter is 22mm, and the smaller outer diameter is 20mm. Print instructions My used settings: Material : PETG Layer thickness : 0,2mm…
Just the case to run OpenIPC based FPV stuff check https://qczek.beyondrc.com/building-openipc-fvp-gears/
Compatible with: Extruder : SKU M3205 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 6 Printers Hotend: Micro Swiss All Metal Hotend Hotend Fan: 4010 Part Cooling Fan: 4010 Blower Probe: none 3D Printer Model: Ender-6
This is the 5000 Trac VC set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This model is compatible with the lego system.
This model is compatible with the lego system.
This thing is a wall mount for a Bissell Pet Stain Eraser (model 2054). Strangely, Bissell doesn't seem to have one available. Note: This version has small changes from the last one I printed. I added screwdriver access holes and fixed…
Originally published here: (WIP) Motorola Moto E7 & E7i Power xt2052 case by tato_713 - Thingiverse This case was designed for the phone E7, E7 Power and E7i Power. It could be compatible too with the E7 Plus, but this one has a slightly…
Wall mount for Lego Technic Chevrolet Corvette Stingray Blue. I assume it would also work for the yellow version 42205. It's not pretty but it works!
Peugeot 205 GTI, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Start:270c, End:205c. This is a remix of ABS+PLA to get a better test range for PETG and other filaments. Sadly I did a poor job (using Windows 3D builder) and my layers are off by one, however it still performs the job adequately.…
There seem to be no cases available either from the manufacturer or online as printable 3d models. I removed the gridfinity squares, added a bin for parts and a top that bolts on and snaps closed. 2x 1.25" M3 bolts are needed for the top.…
Simple Phoneholder for Mercedes W205. Fits my iPhone 13 Pro, maybe other models as well. I recommend printing Frame and case holder separately and gluing them together. It’s not perfect, but it does the job. You snap it over the display.…
This model is compatible with the lego system.
bottom and lid from PLA, PETG, PCTG or ABS, 3 shells, 0,2 layerheight, 15% infill latch 2 peaces from PETG, PCTG or ABS, 4shells, 0,2 layerheight, 25% infill seal from TPU 4 shells, 0,15 layerheight, 20mm/s
bottom and lid from PLA, PETG, PCTG or ABS, 3 shells, 0,2 layerheight, 15% infill latch 2 peaces from PETG, PCTG or ABS, 4shells, 0,2 layerheight, 25% infill seal from TPU 4 shells, 0,15 layerheight, 20mm/s
Check out if your bed is good levelled. Print Settings Printer: 4Max Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category: 3D Printing Tests
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the PLANMC EQ2050 unit , and…
Dremel 2050 Stylo+ EU Rugged Box Benötigte Schrauben 6x M3 25mm keine Supports nötig
Remix that fits the EU adapter instead of the US version
The cover holding the window regulator switches in the front door of a Peugeot 205 (1983-1998), originally designed for a 1991 build. The originals are often heavily erroded from sunlight. No extra support needed, comes with integrated…
Downloaded a mount and hated the print so I designed my own. Fits like a glove. If your printer isn't finely tuned, I'd probably experiment with 101-102% scale printing. I just printed it at 2 shells and 10% infill using Prusament PLA…
Here is the Dremel 2050 Stylo spindle holder for the "Fully 3D Printed Small CNC Router/Plotter" I had some problems with the HF Spindle. Turns out you do get what you pay for! The Dremel 2050 Stylo had more power than I was expecting…
I didn’t print this myself yet, but while installing the original part I came up with a few improvement ideas. Update (11-02-2026): Uploaded Revision 2 added few radious to improve rigidity added .stl version since the step version had…
Cube-16 Interlocking puzzle by Stewart Coffin (STC #205) Assemble the five pieces into a 4x4x4 cube. This is an interlocking puzzle based on the same ideas as Coffin's earlier Patio Block . In Coffin's words: "It represents a conversion…
Please look at the several STL files , I plan to upload more in the future. Note that the feet can be mounted from the both sides (if needed at all) also note that all the OEM Biltema accessories will fitt. Enjoy !
This is a compact electrical junction box , designed specifically for WAGO 2273-204/205 connectors . The enclosure features M15x1.5 threaded holes for cable glands and a cover secured with M3x0.5 screws . The inside includes compartments…
Das ist jetzt quasi Version 3 der Becher für den Cupholder. Ich habe sie von daher verschlimmbessert, das ich den Boden an der runden Ecke etwas angehoben bzw. abgerundet habe, Jetzt kann ich mit meinen Wurstfingern auch eine Münze oder…
It the simplest holder i could come up with. May add a ball-joint to the back, in case i want to mount in a differnt one, depends, how well it will function.
I slightly increased the width to fit the multimeter in the rubber case and made holes for compatibility with honeycomb storage wall. Also I increased the height for the probes holder. You'll need to print two M3 inserts (included in the…
I modified this to include a lip to push into foam. Used this on my Rainbow wing from banggood.com . A great motor mount, but with the modifications it's perfect to glue this on with Welder's glue. Fits any of the standard "quadcopter"…
These are the source files for my Arducam B0205 flexible mount project, please read the full story at http://www.drracer.eu/3dp/20201115_arducam Disclaimer: The attached 3MF files have been optimized for my MK3S to print fillamentum's…
Drei-teiliger Druck mit Magnet-Einsätzen. Magnete wahlweise Ø6x4 und oder Ø10x3. Der Grundhalter passt für eine Mercedes C-Klasse und wird zwischen Display und Tacho geklemmt.
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
Holds the Dremel 2050 at a 30° angle ready for you to use on your multiboard wall board organizer Category: 3D Printing
Any material should be okay, but I personally suggest printing it with PETG.
CFMOTO 450MT Seat rubber cushion part number: 1) 6KJ0-130204 2) 6KM0-130205
A replacement chassis for a Sprit 1/32 Peugeot 205 slot car. Category: 3D Printing
***********IMPORTANT NOTE, THIS IS AN OLDER / UNMAINTAINED DESIGN******** I recommend you get the newer version which has many improvements: https://www.printables.com/model/1097162-swivel-mounted-camera-arm-mount-collection-for-pru the…
Support to adapt the Gk7205V200 camera to an FPV test drone.
Project: demonslayer logo.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x204.52mm in size You may print at higher layer heights below the Min Depth of 1.2mm The Max Depth is 3mm and the…
It broke, so I printed a new one. Printed at 0.15 mm layer height (Pretty much anything works) I don't think there is another soul with this exact keyboard and a 3D printer but if you do, hey, glad to be of help.
para las mosquiteras, agarre que se suele romper, modelo con tornillo de acero y pieza plastico para evitar la rotura
When you put a Red Bull can into the canholder of the Mercedes W205, it's shaking around. I created a simple insert for the canholder, that the RB-can will fit perfectly.
This is a tray/case for the ANKER PowerWave Pad ( https://www.amazon.co.uk/gp/product/B07DBX67NC/ ) The tray hasn't got a back support for the phone as this is design to fit the centre compartment of the Mercedes C-Class (W205) and this…
you probably want the newer update to this: https://www.printables.com/model/497457-arducam-day-night-b0205-case-and-swivel-mount-with which addresses a few issues! Should be pretty straight-forward to print & connect. The back plate will…
I printed it with 20% infill and no support. Filament Change is of course optional.
Wischwasser Trichter für Mercedes C-Klasse W205 (und bestimmt auch andere?) Konzipiert für TPU oder anderes gummiartiges Filament. Genauso einfach wie den Verschlussdeckel draufdrücken und beide Hände freihaben zum Eingießen. Sehr…
This is a replacement for part number A2056800691 and therefore, compatible to Mercedes W447 (V Class), W205 (C Class), W213 (E Class) and W238 (E Class). Detailed instructions will follow later. Here are some remarks as first aid :D As…
This is a neat shell I made for a pentel P207 (It can also be used for the pentel P205 with no issues) Be careful with the bed adhesion for this one, I would use a brim. Depending on the filament used you may be in for some more post…
A replacement part for a Superlux E205U microphone, which holds the microphone in the arm stand/holder. The part that connects to the screw on the stand might be the wrong thickness, so check before printing.
Ecopes de freins pour 205 avec jupe type GTI, boa diamètre 60mm, pour imprimer l'autre côté utiliser l'outil symétrie du slicer, nécessite quelques modifications (rotation du klaxon et modification du support de radiateur si…
Buying the required electrical parts locally proved difficult, so I bought a cheap lamp instead. Unfortunately, the E14 socket wasn't compatible with the original lamp base because only the top part was threaded. This mount moves the…
I really liked the simple and effective design of Drew's dice tower, but my Prusa MK3S can only print up to 210mm high. I took a couple of slices out of the middle to bring the overall height to 205mm. All other dimensions remain…
size is 205mm x 25mm
Rear Dashcam Holder to mount a Vantrue N4 / N5 Rear Cam (maybe others models too) to your T-Models headliner without screws and holes. This mounting was created as alternative to route the cable into the back entrance door. The holder…
Reinforcements for the new style of Arrma Mojave body mounts #ARA320544 Should only print in a flexible material like TPU Need 8 zip ties. Four of them will need to be about 8 inches long.
Carte en kit d’une Peugeot 205 J’ai fait ce modèle pour un ami fan de 205. ouvrir les pièces en une seule fois par plaque sinon le cadre ne sera pas bien placé ! Impression: Hauteur de couche : conseiller 0,08mm / max 0,10mm Remplissage :…
Dremel 2050 Stylo+ US Rugged Box A small modification to ZS Design's Dremel 2050 Stylo+ EU Rugged Box for the US power adaptor. Required hardware: 6 M3 c 25mm screws No support needed .20mm Standard 15% infill
lego 6180 6179 6178 6205 88646 4151 33909 41740
The nozzle of my SideWinder Air Pump 62055 was lost. I downloaded 'TheAlmoner' Remix, scaled it down a bit and chopped the end to fit my air mattress and it's a perfect fit ! This is the remix of a remix Printed with PETG on a Bambulab P1P
This model is a copy of the Bail Arm Guide 1205889 for Shakespeare Encore ENC2xx reels. The OEM part is listed here: https://www.ereplacementparts.com/bail-arm-guide-p-1433447.html When my reel's bail reset action stopped working, I…
Designed for Arducam B0205 Printed without supports with the flat edge facing downwards. All parts are tolerances by 0.25mm and fit together nicely I originally designed the case to snap together with pegs that go through the Arducam…
Contains motor belt(240mm) and tape drive belt(380mm) for the Majak 205(1982) tape player. Print with TPU with default 0.20 mm QUALITY and Generic Flex Profile
![M3205 Ender-6 [Micro Swiss NG Extruder] Fan Shroud](https://media.printables.com/media/prints/752947/images/5875505_17f149a5-bb91-4366-a4bc-c0ad82a8a4fe_af8befb9-887e-4138-9dd5-dc527ac7cf2f/ngender67_2400x2400.webp)
