1 / 3
Macbook Air Charger Case ( 30W European plug )
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the original, but completly redesigned for the charger that comes with the MacBook Air M1.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 309
- Wydruki
- 3
- Wyświetlenia
- 2400
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (56)Powiązane
It doesn't require any special settings, I printed it in PETG at 0.2mm resolution.
It will probably fail to work if printed with a higher diameter nozzle than 0.4mm because the lip that holds the lid might not be strong enough.