DomLuck's Hot Rod - Ender 3 V3 KE Fan Shroud - D.L.H.R.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular shroud for the Ender 3 V3 KE that aims to provide better cooling and ease of access to the extruder and nozzle
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 259
- Wydruki
- 4
- Wyświetlenia
- 2252
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I'm not a huge fan of the looks of the original Ender 3 V3 KE's shroud, it's too bulky and the fact you need to remove it to access the extruder's spring tensioner or swap the nozzle really bothers me.
So I designed this one, inspired by hot rod cars.
- It tilts the fans outward to provide more direct airflow for the part cooling.
- Allows for the fans to be installed facing upwards or downwards, I believe using them upwards will facilitate hotend cooling and improve airflow overrall but I don't have the tools neither the patience to really put those claims to test.
- The minimalistic brackets allow for adjusting the extruder's spring tension without removing the shroud;
- The ducts provide 360 airflow and are removeable allowing for nozzle changes without removal of the fans shroud.
- there's an integrated notch to facilitate operation of the extruder's lever.
I printed it out of PETG and the duct sits far enough from the hotend that I didn't see any deformation after many hours printing at 260c.
I used supports, 15% infill, 3 walls and 6 top/bot layers and it took me about 6 hours to print it and weighed about 50 grams that could be reduced to 40 grams by reducing walls to 2 and top/bot layers to 4.
The little clips are used to ensure proper alignment of the duct and I glued mine to the front part, but just pressure fitting is good enough too.
