1 / 2
Koppla rail printready less fillament (remix) of @volly
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the koppla rail, uses aprox. 25% less fillament.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Just added hex holes to the design by @volly. As i own about 10 of these boys around the house, for every 4 i printed i saved enough filament for 1 extra one.
https://www.printables.com/model/315746-ikea-koppla-slide-tail-mount original design
Saves aprox 25% fillament.
My bed adhesion wasnt the best, so i needed to use a 5mm brim which is easily removable.
Print with the Y axis following the bide side ( as seen in the pictures ).
The design is strong enough to withstand a 200 pound gorilla reaming and plugging stuff in.