P
PrintablesHasanen
Underware/Multiboard - Ikea Koppla power strip brackets
Used provided parametric Fusion360 file and created brackets for Ikea's Koppla power strip.
- Pobrania
- 779
- Polubienia
- 79
- Ocena
- 4,6
Wyniki wyszukiwania: koppla
Liczymy pasujące modele…
P
Printablesvolly
IKEA KOPPLA slide- / tail-mount
Print recommendations no support needed print with the smallest side on the bottom for optimal results position the model with the long side in the same direction as the printers base plate is moving while printing Will match to IKEA…
- Pobrania
- 425
- Polubienia
- 61
- Ocena
- 5
P
PrintablesSprabtor
Skadis Koppla Mount
A remix of a Koppla mount for the Ikea Skadis pegboard system. The Koppla power plug extension is slightly raised and angled for the use with the Skadis desk mounting kit. You can find the related M2 T-Nut-System files and more…
- Pobrania
- 368
- Polubienia
- 129
- Ocena
- 5
P
PrintablesSoundDoc
LACK Attack #3: Koppla the Lack (aka Power The Lack Stack)
This is a followup to: Lack Attack#2: LACK Attack #2: Casterate the Lack: https://www.prusaprinters.org/prints/15918-lack-attack-2-casterate-the-lack-aka-roll-the-lack without further adieu.... Attack 3: KOOPLA THE LACK Next thing was to…
- Pobrania
- 362
- Polubienia
- 121
- Ocena
- 4,6
P
PrintablesP S
PowerStrip Holder IKEA KOPPLA for SKADIS
Dimensions had to be adjusted from the original model to fit the Koppla size. Printed at 50% infill in PLA.
- Pobrania
- 301
- Polubienia
- 37
- Ocena
- 5
P
Printableshumansizedmonkey
IKEA KOPPLA power strip holder for SKADIS pegboard
Needs some support for the hooks.
- Pobrania
- 275
- Polubienia
- 46
- Ocena
- 4,5
P
Printablesthnkfrsh
IKEA KOPPLA Holder Remix (Slim) - Wall Bracket for multi socket
Please note that this model is a remix from this design from crashdebug on Thinigverse. As I didn't like the wide setup of the original file I decided to rearrange the position of the holes. Happy printing! Notes: Used "support from built…
- Pobrania
- 201
- Polubienia
- 15
- Ocena
- 5
P
Printablest0b1
Koppla wallmount
Mounting bracket for IKEA KOPPLA power strips. This is a rather trivial remix of @telegnom's Koppla Wallmount (Euro Version): https://www.thingiverse.com/thing:1687838/ Thanks @telegnom for sharing. ☺ Edit: I have added the OpenSCAD file…
- Pobrania
- 194
- Polubienia
- 29
- Ocena
- 5
P
Printablesyogi_bear
Koppla Powerboard Holder for Ikea Mittzon Desk
This is a remix of Gregor1991s model to provide a frame for the Koppla Powerboard when not using the complete Mittzon desk frame. As the support for the powerboard is built into the desk frame and not the add-on module, if you use the…
- Pobrania
- 170
- Polubienia
- 13
- Ocena
- 5
P
PrintablesBarnyardingan
Ikea Koppla Outlet Power Strip 2 hole straps
Needed 2 two hole straps to mount the Ikea Koppla power strip to the wall. One strap has a cutout for the plug on the end. I've included the fusion file if you need to modify it at all. I used Esun PLA+ as it was already loaded and it…
- Pobrania
- 155
- Polubienia
- 22
- Ocena
- 5
P
PrintablesStefan Nussbaum
Halterung für IKEA KOPPLA Mehrfachsteckdose
Version für CH
- Pobrania
- 150
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBob837
IKEA Koppla powerstrip EU 8 Plug mount (small & fast to print)
It's a smaller and faster print than the original. I just performed a cut through one of the mounts
- Pobrania
- 147
- Polubienia
- 16
- Ocena
- 5
P
PrintablesFraxinus
IKEA KOPPLA extension cord mount for IKEA SKADIS pegboard
This mount allows you to place your IKEA KOPPLA extension cord anywhere on the SKADIS pegboard without using glue or screws. It is based on an amazing model made by Cunfusu which I found on Thingiverse…
- Pobrania
- 118
- Polubienia
- 32
- Ocena
- 5
P
Printablesdrola
Ikea Koppla 3-way Socket Wall Bracket
This will hold your Ikea Koppla 3-way socket under your desk or on a wall.
- Pobrania
- 111
- Polubienia
- 17
- Ocena
- 5
P
PrintablesPavelB
Koppla extension cord holders - remix
Printed in PETG and fits fine, looks durable. This is a remix of https://www.thingiverse.com/thing:4942631
- Pobrania
- 109
- Polubienia
- 12
- Ocena
- 5
P
PrintablesNovator
IKEA KOPPLA outlet power clamp holder
I would like to participate in the Clamp-On Items contest. You can adjust bolt and press using OpenSCAD file. Print with 100% infill. Print cap tip with flex filament.
- Pobrania
- 76
- Polubienia
- 22
- Ocena
- 5
P
PrintablesPalermo
Ikea Koppla holder (n° 204.120.24)
Holder for Koppla french version (n° 204.120.24) with 2 versions (holes inside and outside)
- Pobrania
- 70
- Polubienia
- 9
- Ocena
- 5
P
PrintablesPhil
IKEA KOPPLA multiplug
"Quick and dirty" 3D-Model for desk-planing. Here is the 4-EU-plug version incl. 2-USB 5V slots 13W (total). Category: Household
- Pobrania
- 60
- Polubienia
- 5
- Ocena
- 0
P
Printablesfelixna
IKEA KOPPLA Power Strip clamping bracket with screws to the top
The power cable for my OctoPi was too short for the power strip laying on the floor, so I needed to mount the power strip below the base plate. Constructed this clamp for the Ikea Koppla power strip so that the mounting screws were going…
- Pobrania
- 57
- Polubienia
- 10
- Ocena
- 5
P
Printablesszz
IKEA KOPPLA (3-way) holder for Underware
Slides onto bottom rail of the socket. Tested with UK version, fits EU too.
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 5
P
PrintablesDe_Raffi
IKEA KOPPLA Power strip holder (Switzerland and Lichtenstein) (Schweiz und Lichtenstein)
Introducing my personalized IKEA KOPPLA Power Strip Holder – a game-changer for cable chaos in Swiss and Liechtenstein homes! This one's got a twist – I designed it to be 3D printable, attachable with small screws, and it's a breeze to…
- Pobrania
- 51
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLuka
Ikea Koppla power strip mount to Ikea Lack table leg
Ikea koppla power strip bracket for Lack table leg. (will also fit other 50mm2 table legs). Easy to print, no support. Remixed from: https://www.thingiverse.com/thing:1376701
- Pobrania
- 49
- Polubienia
- 10
- Ocena
- 5
P
PrintablesEgor Sklyarov
IKEA KOPPLA 6 EU Mounting Bracket
Each mounting bracket has a 3.5mm hole for screw, two pins matching extension cord casing holes, and holding flaps. Two brackets per extension cord is required. The whole bracket bends to accept the extension cord. I've printed it from…
- Pobrania
- 45
- Polubienia
- 7
- Ocena
- 5
P
PrintablesRCoasterDan
Koppla (EU) mounting for Lack Printer Enclosures
This is a remix of SoundDoc's LACK Attack #3: Koppla the Lack. Beside changing the dimensions for fitting the EU version of Koppla, I've also made a ‘small’ version for those who need a smaller version of the surface mount. Added some…
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMaOl
Molly Guard for switch of x-way socket (e.g. IKEA Koppla)
I needed to cover the switch of my Koppla 4-way socket which is right next to the op of my bed... I desingned 2 Verions of the molly guard, for the first you need some support for the hinge (I used a metal paper clip and glue to close the…
- Pobrania
- 37
- Polubienia
- 9
- Ocena
- 5
P
PrintablesHerzogCrafts
IKEA Koppla Mount brackets for Table Back
Print laying on the side without support structures. That way the part is the strongest I printed it with 5 Walls and 6 top and bottom layers; 20% infill. To attach it I used 4.5x16 mm Wood screws. You can also use longer ones depending…
- Pobrania
- 35
- Polubienia
- 8
- Ocena
- 5
P
PrintablesEmil Büge
IKEA KOPPLA Powerstrip Holder / Bracket
A wall, or under desk mounting option for your IKEA KOPPLA powerstrip.
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 5
P
PrintablesShawinkle
Ikea Koppla support
Modifications : Cable tile fixation Cable hole enlarged to 3 cm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: Eryone PETG white
- Pobrania
- 33
- Polubienia
- 11
- Ocena
- 0
P
PrintablesGreg
IKEA Koppla multiplug holder
Just another holder for IKEA Koppla multiplug (USB version). It is a modified version from Olo Deepdelver's holder, changing the screw brackets to be inline with the multiplug to fit tighter spaces, fix on IKEA 4cm furniture legs, etc.…
- Pobrania
- 33
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJannisJFry
Clamp for IKEA KOPPLA
Here is a clamp to mount the IKEA KOPPLA flush on a IKEA MOSSLANDA. All you need are two M5 screws, two washers and two M5 nuts to secure the koppla to the clamp. I used a jigsaw to cut the shape of the koppla into the mosslanda shelf,…
- Pobrania
- 33
- Polubienia
- 9
- Ocena
- 0
P
PrintablesAnthonySimek
Power Strip Holder (IKEA KOPPLA EU)
An adapter to loosly hold the power strip to the bottom a table. 3.80 mm ⌀ hole for a screw. WORK IN PROGRESS Just slide the holder onto the strip and bolt it to the table. Please use at least 2.
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
Printablesrobkrueger
Underware Item-Holder für die IKEA KOPPLA Mehrfachsteckdose 8-fach/Schalter, geerdet weiß, 1.5 m (500.864.02)
Für das fantastische Cable Managment-System “Underware / Underware 2.0” von @HandsOnKatie_827995 habe ich hier mit dem Generator einen Item-Holder für die Steckdosenleiste von IKEA “ KOPPLA Mehrfachsteckdose 8-fach/Schalter, geerdet weiß,…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLloyd Keays
Wall mount for 3 way socket Ikea KOPPLA
It fits this model - tested on EU . Prints without support. printed at 0.24mm, 2 walls (if smaller, simply make 3 walls, no infill). You place the mount wire side first, then place the KOPPLA in it, place the left or right mount on the…
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPetri
Vertical holder for Ikea Koppla powerstrip + USB extension cord
0.2 mm layer height, printed on PETG with supports
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPalermo
Ikea Koppla holder (HSW and Multiboard version)
HSW and Multiboard holder for Koppla french version (n° 204.120.24). For the different versions, you need : multiboard : 4 x M3x8mm Hex Socket Cap Screw + 4 x Drop-In Nut Snap - M3 HSW : 4 x M3x8mm Hex Socket Cap Screw + 4 x HSW insert…
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
Printablesvvzvlad
Ikea KOPPLA fasteners for beam 30x30
A simple thing to attach an ikea copla (60412017) extension to a 30x30 bed beam. There are ovtersts for two M3 bolts at the top, which can be attached via a fusible sleeve or via a nut on the opposite side. Designed for printing without…
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
PrintablesErwinDesmond
Koppla rail printready less fillament (remix) of @volly
Just added hex holes to the design by @volly. As i own about 10 of these boys around the house, for every 4 i printed i saved enough filament for 1 extra one. https://www.printables.com/model/315746-ikea-koppla-slide-tail-mount original…
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPetr Cach
Skadis/Koppla stand
Just another stand for Ikea Skadis perf board, with the Ikea Koppla extension cord in it. Fits Skadis board width 36cm. You can use the original bolts which cam with Scadis bord to attach the stand. The thread will cut into the plastic…
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCornfield9314
![[IKEA] FJÄLLBO / Koppla power strip brackets](https://media.printables.com/media/prints/481fe52a-08f6-4140-8188-cbbbe1fe10ef/images/11507866_a47ecee1-659b-4bf1-adbe-d84c3827a2ff_d9109f15-f29c-4f86-a5a9-d335dc439c08/img_0604.jpg)
[IKEA] FJÄLLBO / Koppla power strip brackets
Combination of two modesl to fit power strip under your Ikea FJÄLLBO
- Pobrania
- 21
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLucrais
Ikea KOPPLA socket holder wall mount
Hello, Sharing an easy and quick to print wall mount for Ikea KOPPLA socket. Dimensions: 59 x 47 x 70mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
Printablesmortenlj
Koppla case
This is an electronics case designed to fit over the IKEA Koppla single-port USB charger. That variant of the Koppla charger has since been replaced by the Småhagel charger…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintableszUltra
IKEA Koppla 6x1 Gridfinity Insert
This tray was always quite awkward. Everything slid around in there, not really knowing its place. Since I don't like wasting things, this is not a replacement to the included tray, instead it docks inside and snugly snaps in with little…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesESPBoards
IKEA Malm + Koppla - Bedside 3-way Power Strip Holder
An IKEA Koppla power strip 3-way socket holder for IKEA Malm Bed. It allows you to place your IKEA KOPPLA extension cord on the IKEA MALM bed without glue or screws. IKEA Malm Bed (Article number: 904.047.99 ) IKEA Koppla 3-way socket…
- Pobrania
- 11
- Polubienia
- 7
- Ocena
- 0
P
PrintablesIwan
Ikea Nesstun Koppla Coupling
Wanted better cable management under the bed for easy vacuuming. Made a hanging design for the Ikea Koppla socket. Slides nice and with tight clearance over the Koppla. This one is specifically designed for the Nesstun bed frame. I added…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPrintedCompositions
IKEA KOPPLA extension cord button cover
This is a cover to prevent accidental switching off of devices plugged into KOPPLA extension cords by IKEA for British plugs.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablestoto3D
IKEA KOPPLA power strip mount
It’s fixed to the wall using six pins (up to about 2mm thick), so it’s very sturdy. If you like this design, I’d really appreciate a like and any feedback. Thanks! Print Settings Printer Brand: Creality Printer: Ender 3 S1 PRO Rafts: No…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesp2baron
Router Template – Flush Trim Jig for IKEA Koppla Power Strip (Desk Mount)
Want to mount your IKEA Koppla power strip flush into your desk for a clean, built-in look? This router template lets you rout the exact opening needed — no guesswork, no sloppy cuts, just a perfect fit every time. This template is split…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesInjusticeFairy
Koppla Track adapter for Opengrid
remixed to print without supports
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printables
Ikea Mittzon - Koppla frame
As Ikea is not selling the mounting frame separately, I designed this frame to have a tight fit for the koppla power outlet. depending on the printer tolerances you have to scale to 99% printed with PETG, 0,4mm nozzle
P
Printables
IKEA KOPPLA power strip mount
It’s fixed to the wall using six pins (up to about 2mm thick), so it’s very sturdy. If you like this design, I’d really appreciate a like and any feedback. Thanks! Print Settings Printer Brand: Creality Printer: Ender 3 S1 PRO Rafts: No…
P
Printables
IKEA Koppla wall mount (two variants: horizontal and vertical alignment)
This is a simple wall mount for IKEA Koppla socket strips in two variants for horizontal and vertical alignment of the sockets. STEP, FreeCAD and STL attached, so you can modify it for your own needs. If you like my design, please post a…
P
Printables
Koppla Angled Desk Mount UK
A quick 'n dirty mount for an Ikea UK plug Koppla 4-way power adapter. I wanted it mounted on my desk, at a 45 degree angle, and couldn't find any on Thingiverse, so I quickly made this. I'm still printing my first one - so it's untested.…
P
Printables
IKEA MITZZON KOPPLA Insert
Hey! I recently got a standing desk from IKEA and the KOPPLA extension cord that is supposed to slot into the cutout in the desk was and is sadly out of stock. I got annoyed by having an empty space in my desk being unused, so instead I…
P
Printables
Ikea MITTZON - Koppla Cover
At work we are using Ikea Mittzon desks. These desks are designed to use the Ikea own power outlet series “Koppla”. At some of the desks we dont have these outlets. Instead of having blank openings, i designed a tight fit cover panel to…
P
Printables
Ikea Mittzon - Koppla frame
As Ikea is not selling the mounting frame separately, I designed this frame to have a tight fit for the koppla power outlet. depending on the printer tolerances you have to scale to 99% printed with PETG, 0,4mm nozzle
P
Printables
Koppla Power Strip support (IKEA)
This support have the exact dimensions for the 6 plugs Koppla Power Strip from IKEA and the LINNMON table, also from IKE
P
Printables
Ikea KOPPLA outlet power strip mounting bracket
I designed this custom bracket to mount the Ikea KOPPLA 6-outlet power strip (model E1654-EU6WSW) when the surface wasn’t wide enough for a typical end-mount design. This model features screw holes positioned one outlet in from the ends.…
P
Printables
Round IKEA KOPPLA 6 EU Mounting Bracket
Remix of the mounting bracket by Egor Sklyarov to allow it to be mounted on a round table leg
P
Printables
IKEA KOPPLA Mount for SKADIS
Inspired by this https://www.thingiverse.com/thing:4071960 by meckermac, I have made a similar model for SKADIS mounting. Print Settings Printer brand: Creality Printer: Ender 3 Resolution: 0.28 Infill: 40 Notes: The SKADIS charger hook…
P
Printables
IKEA KOPPLA 6 Outlet Power Strip Mounting Bracket (US/CA version)
Mounting bracket for the IKEA KOPPLA 6 outlet power strip sold in the North American market. Print two units, and install using four #8 screws (as designed), or another screw if you modify the hole yourself. I've printed this in Bambu Lab…
P
Printables
Ikea Skadis Lateral Power Strip Holder (modified for Ikea Koppla power strip)
This is a remix to make the holder work with a IKEA KOPPLA power strip that's a fair bit smaller in the two relevant dimensions than some others.
P
Printables
Under-Desk Mount for IKEA Koppla Power Strip – Parametric (FreeCAD)
These mounts clip onto the IKEA Koppla power strip and let you secure it cleanly to the underside of your desk. No glue, no velcro, no ugly solutions — just a solid, hidden mount. Designed to work together with my router template for…
P
Printables
Ikea KOPPLA socket holder for PLATSA without screw!
I created this model, inspired from an other one but I created a clip, like that no need for screws. Take off the door plug the socket where you want and put back the door. My daughter needed a socket for her activities and I hate wires!…
P
Printables
IKEA Koppla - Wall adapter
Made this quick file to be able to fix this extension in place nicely. Works with two screws , I typically use it fixed on my wooden bed frame for some weeks now. Screws of 30mm minimum are required. The diameter I have used is 4mm.
P
Printables
Koppla Power Strip Holder (Lack modified)
Wife wanted me to use the 3D printer to fix the problem with the power strip sliding around so I modified two awesome models to solve the problem since I couldn't find a tidy solution. My modeling skills suck so if anyone can clean up the…
P
Printables
Ikea KOPPLA wall bracket
I created this bracket, so I can store the Ikea koppla to a wall. Like it? Buy me a coffee: https://buymeacoffee.com/erwinha
P
Printables
Ikea Koppla Skadis (UK Power Strip) Mount
Printed with PETG, adjusted in Tinker Cad. Fits. Can be slightly tighter if you wish. Drop a like or two if you find it useful. Its nice to see these things grow over time.
P
Printables
Mount for IKEA KOPPLA multiple plug
This is a simple mount for IKEA KOPPLA or similar shaped multiple plugs. I printed it with 100% infill in Esun PLA+. I recommend hybrid tree support. For the screws I used wood screws 3.5x20 from SPAX but the screw covers shoud fit to any…
P
Printables
Koppla multiplug wall fastener
printed on the mk4 without a problem, pictures are from a prototype, since then i added thickness to the bottom part and filleted the holes
P
Printables
IKEA Koppla power strip mounting brackets
Bracket for screw-mounting IKEA Koppla power strips. Source files created with FreeCAD 0.14. Print instructions Unassociated tags: power socket, power strip, power strip mount, universal mount Category: Organization Summary Bracket for…
P
Printables
IKEA Koppla power strip mounting brackets
I remixed crashdebug 's ' IKEA Koppla power strip mounting brackets ' in order to attach my power strip to my closet without screws. Print Settings Supports: No How I Designed This Remixed using Tinkercad .
P
Printables
Ikea Koppla 6-way Outlet Splitter Holder
The Ikea Koppla is a 6-way Outlet Splitter (North American). It turns a 2-outlet/duplex receptacle into 6 outlets. However, there is no easy method of securing the Koppla to the wall. Once plugged into the receptacle, only the friction of…
P
Printables
Ikea Koppla Desk Holder - Glue on Edition
I wanted a 45 degree holder for my Ikea Koppla powerswitch. As i couldn't find one i remixed an existing holder (thanks @volly !) with a block to glue on top of your desk or an altenative for screwing into you desk from behind. Screw in…
P
Printables
Ikea Koppla Desk Holder - Screw- In Edition
I wanted a 45 degree holder for my Ikea Koppla powerswitch. As i couldn't find one i remixed an existing holder (thanks @volly !) with a block to screw in from behind your desk or an altenative for glueing onto your desk. You can cut the…
P
Printables
Power strip holder for IKEA KOPPLA
Die Wandhalterung dient zum senkrechten Befestigen der Vierfachsteckdose an einer Wand oder einer anderen ebenen Fläche.
P
Printables
Table clamp for IKEA KOPPLA extension cord
This clamp is designed to secure an IKEA KOPPLA extension cord to a table, ensuring easy access to the slots while taking up minimal space. The clamp fits tabletops ranging from 10 up to 29 mm in thickness (without pads). Some adhesive…
P
Printables
Holder for Ikea Koppla
Printed from PLA, two 4mm screws for mounting to the desk / cabinet Print instructions: 0.2 layer 0.6 nozzle 5 perimeters or 100% infil from 3mm height to the top supports (idealy breakaway with 0 top clearance, top interface pattern…
P
Printables
IKEA KOPPLA 6 ways EU socket support for 80x40 aluminium extrusion
I've simply print it with the default PLA 0.2 profile for the MK3S on Prusa Slicer. Support needed. The screw hole diameter are 8mm.
P
Printables
Skadis holder für Ikea Koppla power strip
Another version of a Koppla mount for Skadis. I needed a flat bottom and holes for M2.5 Socket head screws. Designed for use with the Skadis T-Nuts Mounting System for Ikea Skadis Pegboards with M2.5 screws (Perfect: M2.5x12 SHCS).