Table clamp for IKEA KOPPLA extension cord
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table clamp designed to hold an IKEA KOPPLA extension cord at a 45-degree angle on the edge of a table.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 200
- Wydruki
- 1
- Wyświetlenia
- 1022
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This clamp is designed to secure an IKEA KOPPLA extension cord to a table, ensuring easy access to the slots while taking up minimal space. The clamp fits tabletops ranging from 10 up to 29 mm in thickness (without pads). Some adhesive pads are often needed to enhance friction on tabletops.
If the bolt doesn't fit into the nut due to tight tolerances, try scaling the bolt down by 1-2% on the x and y-axis.
Recommended print settings:
- PLA
- Layer height: 0.2mm
- 5 perimeters for increased rigidity
- Cubic infill at around 30%
- Supports for the main part, excluding the threaded parts
- Brim for the bolt
You'll need two clamps to attach the extension cord.
Please share your makes or issues you might have experienced with the model.
UPDATE: There are multiple extension cord models sharing the same name. This clamp is specifically designed for the extension cord with item numbers 902.808.26 / 204.642.54. It's unlikely to fit any other model.