Search results: koppla

Counting matching models…

Underware/Multiboard - Ikea Koppla power strip brackets

Used provided parametric Fusion360 file and created brackets for Ikea's Koppla power strip.

Downloads: 779
Likes: 79
Rating: 4.6

Printablesvolly

IKEA KOPPLA slide- / tail-mount

Print recommendations no support needed print with the smallest side on the bottom for optimal results position the model with the long side in the same direction as the printers base plate is moving while printing Will match to IKEA…

Downloads: 425
Likes: 61
Rating: 5

Order a print of this model

PrintablesSprabtor

Skadis Koppla Mount

A remix of a Koppla mount for the Ikea Skadis pegboard system. The Koppla power plug extension is slightly raised and angled for the use with the Skadis desk mounting kit. You can find the related M2 T-Nut-System files and more…

Downloads: 368
Likes: 129
Rating: 5

Order a print of this model

PrintablesSoundDoc

LACK Attack #3: Koppla the Lack (aka Power The Lack Stack)

This is a followup to: Lack Attack#2: LACK Attack #2: Casterate the Lack: https://www.prusaprinters.org/prints/15918-lack-attack-2-casterate-the-lack-aka-roll-the-lack without further adieu.... Attack 3: KOOPLA THE LACK Next thing was to…

Downloads: 362
Likes: 121
Rating: 4.6

Order a print of this model

PrintablesP S

PowerStrip Holder IKEA KOPPLA for SKADIS

Dimensions had to be adjusted from the original model to fit the Koppla size. Printed at 50% infill in PLA.

Downloads: 301
Likes: 37
Rating: 5

Order a print of this model

Printableshumansizedmonkey

IKEA KOPPLA power strip holder for SKADIS pegboard

Needs some support for the hooks.

Downloads: 275
Likes: 46
Rating: 4.5

Order a print of this model

Printablesthnkfrsh

IKEA KOPPLA Holder Remix (Slim) - Wall Bracket for multi socket

Please note that this model is a remix from this design from crashdebug on Thinigverse. As I didn't like the wide setup of the original file I decided to rearrange the position of the holes. Happy printing! Notes: Used "support from built…

Downloads: 201
Likes: 15
Rating: 5

Order a print of this model

Printablest0b1

Koppla wallmount

Mounting bracket for IKEA KOPPLA power strips. This is a rather trivial remix of @telegnom's Koppla Wallmount (Euro Version): https://www.thingiverse.com/thing:1687838/ Thanks @telegnom for sharing. ☺ Edit: I have added the OpenSCAD file…

Downloads: 194
Likes: 29
Rating: 5

Order a print of this model

Printablesyogi_bear

Koppla Powerboard Holder for Ikea Mittzon Desk

This is a remix of Gregor1991s model to provide a frame for the Koppla Powerboard when not using the complete Mittzon desk frame. As the support for the powerboard is built into the desk frame and not the add-on module, if you use the…

Downloads: 170
Likes: 13
Rating: 5

Order a print of this model

PrintablesBarnyardingan

Ikea Koppla Outlet Power Strip 2 hole straps

Needed 2 two hole straps to mount the Ikea Koppla power strip to the wall. One strap has a cutout for the plug on the end. I've included the fusion file if you need to modify it at all. I used Esun PLA+ as it was already loaded and it…

Downloads: 155
Likes: 22
Rating: 5

Order a print of this model

PrintablesStefan Nussbaum

Halterung für IKEA KOPPLA Mehrfachsteckdose

Version für CH

Downloads: 150
Likes: 4
Rating: 0

Order a print of this model

PrintablesBob837

IKEA Koppla powerstrip EU 8 Plug mount (small & fast to print)

It's a smaller and faster print than the original. I just performed a cut through one of the mounts

Downloads: 147
Likes: 16
Rating: 5

Order a print of this model

PrintablesFraxinus

IKEA KOPPLA extension cord mount for IKEA SKADIS pegboard

This mount allows you to place your IKEA KOPPLA extension cord anywhere on the SKADIS pegboard without using glue or screws. It is based on an amazing model made by Cunfusu which I found on Thingiverse…

Downloads: 118
Likes: 32
Rating: 5

Order a print of this model

Printablesdrola

Ikea Koppla 3-way Socket Wall Bracket

This will hold your Ikea Koppla 3-way socket under your desk or on a wall.

Downloads: 111
Likes: 17
Rating: 5

Order a print of this model

PrintablesPavelB

Koppla extension cord holders - remix

Printed in PETG and fits fine, looks durable. This is a remix of https://www.thingiverse.com/thing:4942631

Downloads: 109
Likes: 12
Rating: 5

Order a print of this model

PrintablesNovator

IKEA KOPPLA outlet power clamp holder

I would like to participate in the Clamp-On Items contest. You can adjust bolt and press using OpenSCAD file. Print with 100% infill. Print cap tip with flex filament.

Downloads: 76
Likes: 22
Rating: 5

Order a print of this model

PrintablesPalermo

Ikea Koppla holder (n° 204.120.24)

Holder for Koppla french version (n° 204.120.24) with 2 versions (holes inside and outside)

Downloads: 70
Likes: 9
Rating: 5

Order a print of this model

Printablesfelixna

IKEA KOPPLA Power Strip clamping bracket with screws to the top

The power cable for my OctoPi was too short for the power strip laying on the floor, so I needed to mount the power strip below the base plate. Constructed this clamp for the Ikea Koppla power strip so that the mounting screws were going…

Downloads: 57
Likes: 10
Rating: 5

Order a print of this model

Printablesszz

IKEA KOPPLA (3-way) holder for Underware

Slides onto bottom rail of the socket. Tested with UK version, fits EU too.

Downloads: 53
Likes: 4
Rating: 5

Order a print of this model

PrintablesDe_Raffi

IKEA KOPPLA Power strip holder (Switzerland and Lichtenstein) (Schweiz und Lichtenstein)

Introducing my personalized IKEA KOPPLA Power Strip Holder – a game-changer for cable chaos in Swiss and Liechtenstein homes! This one's got a twist – I designed it to be 3D printable, attachable with small screws, and it's a breeze to…

Downloads: 51
Likes: 3
Rating: 0

Order a print of this model

PrintablesLuka

Ikea Koppla power strip mount to Ikea Lack table leg

Ikea koppla power strip bracket for Lack table leg. (will also fit other 50mm2 table legs). Easy to print, no support. Remixed from: https://www.thingiverse.com/thing:1376701

Downloads: 49
Likes: 10
Rating: 5

Order a print of this model

PrintablesEgor Sklyarov

IKEA KOPPLA 6 EU Mounting Bracket

Each mounting bracket has a 3.5mm hole for screw, two pins matching extension cord casing holes, and holding flaps. Two brackets per extension cord is required. The whole bracket bends to accept the extension cord. I've printed it from…

Downloads: 45
Likes: 7
Rating: 5

Order a print of this model

PrintablesRCoasterDan

Koppla (EU) mounting for Lack Printer Enclosures

This is a remix of SoundDoc's LACK Attack #3: Koppla the Lack. Beside changing the dimensions for fitting the EU version of Koppla, I've also made a ‘small’ version for those who need a smaller version of the surface mount. Added some…

Downloads: 38
Likes: 2
Rating: 0

Order a print of this model

PrintablesMaOl

Molly Guard for switch of x-way socket (e.g. IKEA Koppla)

I needed to cover the switch of my Koppla 4-way socket which is right next to the op of my bed... I desingned 2 Verions of the molly guard, for the first you need some support for the hinge (I used a metal paper clip and glue to close the…

Downloads: 37
Likes: 9
Rating: 5

Order a print of this model

PrintablesHerzogCrafts

IKEA Koppla Mount brackets for Table Back

Print laying on the side without support structures. That way the part is the strongest I printed it with 5 Walls and 6 top and bottom layers; 20% infill. To attach it I used 4.5x16 mm Wood screws. You can also use longer ones depending…

Downloads: 35
Likes: 8
Rating: 5

Order a print of this model

PrintablesEmil Büge

IKEA KOPPLA Powerstrip Holder / Bracket

A wall, or under desk mounting option for your IKEA KOPPLA powerstrip.

Downloads: 33
Likes: 4
Rating: 5

Order a print of this model

PrintablesGreg

IKEA Koppla multiplug holder

Just another holder for IKEA Koppla multiplug (USB version). It is a modified version from Olo Deepdelver's holder, changing the screw brackets to be inline with the multiplug to fit tighter spaces, fix on IKEA 4cm furniture legs, etc.…

Downloads: 33
Likes: 1
Rating: 0

Order a print of this model

PrintablesJannisJFry

Clamp for IKEA KOPPLA

Here is a clamp to mount the IKEA KOPPLA flush on a IKEA MOSSLANDA. All you need are two M5 screws, two washers and two M5 nuts to secure the koppla to the clamp. I used a jigsaw to cut the shape of the koppla into the mosslanda shelf,…

Downloads: 33
Likes: 9
Rating: 0

Order a print of this model

PrintablesAnthonySimek

Power Strip Holder (IKEA KOPPLA EU)

An adapter to loosly hold the power strip to the bottom a table. 3.80 mm ⌀ hole for a screw. WORK IN PROGRESS Just slide the holder onto the strip and bolt it to the table. Please use at least 2.

Downloads: 31
Likes: 4
Rating: 0

Order a print of this model

Printablesrobkrueger

Underware Item-Holder für die IKEA KOPPLA Mehrfachsteckdose 8-fach/Schalter, geerdet weiß, 1.5 m (500.864.02)

Für das fantastische Cable Managment-System “Underware / Underware 2.0” von @HandsOnKatie_827995 habe ich hier mit dem Generator einen Item-Holder für die Steckdosenleiste von IKEA “ KOPPLA Mehrfachsteckdose 8-fach/Schalter, geerdet weiß,…

Downloads: 28
Likes: 3
Rating: 0

Order a print of this model

PrintablesLloyd Keays

Wall mount for 3 way socket Ikea KOPPLA

It fits this model - tested on EU . Prints without support. printed at 0.24mm, 2 walls (if smaller, simply make 3 walls, no infill). You place the mount wire side first, then place the KOPPLA in it, place the left or right mount on the…

Downloads: 27
Likes: 5
Rating: 0

Order a print of this model

PrintablesPetri

Vertical holder for Ikea Koppla powerstrip + USB extension cord

0.2 mm layer height, printed on PETG with supports

Downloads: 26
Likes: 3
Rating: 0

Order a print of this model

PrintablesPalermo

Ikea Koppla holder (HSW and Multiboard version)

HSW and Multiboard holder for Koppla french version (n° 204.120.24). For the different versions, you need : multiboard : 4 x M3x8mm Hex Socket Cap Screw + 4 x Drop-In Nut Snap - M3 HSW : 4 x M3x8mm Hex Socket Cap Screw + 4 x HSW insert…

Downloads: 26
Likes: 5
Rating: 0

Order a print of this model

Printablesvvzvlad

Ikea KOPPLA fasteners for beam 30x30

A simple thing to attach an ikea copla (60412017) extension to a 30x30 bed beam. There are ovtersts for two M3 bolts at the top, which can be attached via a fusible sleeve or via a nut on the opposite side. Designed for printing without…

Downloads: 26
Likes: 5
Rating: 0

Order a print of this model

PrintablesErwinDesmond

Koppla rail printready less fillament (remix) of @volly

Just added hex holes to the design by @volly. As i own about 10 of these boys around the house, for every 4 i printed i saved enough filament for 1 extra one. https://www.printables.com/model/315746-ikea-koppla-slide-tail-mount original…

Downloads: 25
Likes: 6
Rating: 0

Order a print of this model

PrintablesPetr Cach

Skadis/Koppla stand

Just another stand for Ikea Skadis perf board, with the Ikea Koppla extension cord in it. Fits Skadis board width 36cm. You can use the original bolts which cam with Scadis bord to attach the stand. The thread will cut into the plastic…

Downloads: 23
Likes: 5
Rating: 0

Order a print of this model

PrintablesCornfield9314

[IKEA] FJÄLLBO / Koppla power strip brackets

Combination of two modesl to fit power strip under your Ikea FJÄLLBO

Downloads: 21
Likes: 6
Rating: 0

Order a print of this model

PrintablesLucrais

Ikea KOPPLA socket holder wall mount

Hello, Sharing an easy and quick to print wall mount for Ikea KOPPLA socket. Dimensions: 59 x 47 x 70mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…

Downloads: 20
Likes: 3
Rating: 0

Order a print of this model

Printablesmortenlj

Koppla case

This is an electronics case designed to fit over the IKEA Koppla single-port USB charger. That variant of the Koppla charger has since been replaced by the Småhagel charger…

Downloads: 18
Likes: 0
Rating: 0

Order a print of this model

PrintableszUltra

IKEA Koppla 6x1 Gridfinity Insert

This tray was always quite awkward. Everything slid around in there, not really knowing its place. Since I don't like wasting things, this is not a replacement to the included tray, instead it docks inside and snugly snaps in with little…

Downloads: 14
Likes: 3
Rating: 0

Order a print of this model

PrintablesESPBoards

IKEA Malm + Koppla - Bedside 3-way Power Strip Holder

An IKEA Koppla power strip 3-way socket holder for IKEA Malm Bed. It allows you to place your IKEA KOPPLA extension cord on the IKEA MALM bed without glue or screws. IKEA Malm Bed (Article number: 904.047.99 ) IKEA Koppla 3-way socket…

Downloads: 11
Likes: 7
Rating: 0

Order a print of this model

PrintablesIwan

Ikea Nesstun Koppla Coupling

Wanted better cable management under the bed for easy vacuuming. Made a hanging design for the Ikea Koppla socket. Slides nice and with tight clearance over the Koppla. This one is specifically designed for the Nesstun bed frame. I added…

Downloads: 8
Likes: 3
Rating: 0

Order a print of this model

PrintablesPrintedCompositions

IKEA KOPPLA extension cord button cover

This is a cover to prevent accidental switching off of devices plugged into KOPPLA extension cords by IKEA for British plugs.

Downloads: 7
Likes: 0
Rating: 0

Order a print of this model

Printablestoto3D

IKEA KOPPLA power strip mount

It’s fixed to the wall using six pins (up to about 2mm thick), so it’s very sturdy. If you like this design, I’d really appreciate a like and any feedback. Thanks! Print Settings Printer Brand: Creality Printer: Ender 3 S1 PRO Rafts: No…

Downloads: 6
Likes: 1
Rating: 0

Order a print of this model

Printablesp2baron

Router Template – Flush Trim Jig for IKEA Koppla Power Strip (Desk Mount)

Want to mount your IKEA Koppla power strip flush into your desk for a clean, built-in look? This router template lets you rout the exact opening needed — no guesswork, no sloppy cuts, just a perfect fit every time. This template is split…

Downloads: 6
Likes: 0
Rating: 0

Order a print of this model

PrintablesInjusticeFairy

Koppla Track adapter for Opengrid

remixed to print without supports

Downloads: 2
Likes: 0
Rating: 0

Order a print of this model

Printables

Ikea Mittzon - Koppla frame

As Ikea is not selling the mounting frame separately, I designed this frame to have a tight fit for the koppla power outlet. depending on the printer tolerances you have to scale to 99% printed with PETG, 0,4mm nozzle

Order a print of this model

Printables

At work we are using Ikea Mittzon desks. These desks are designed to use the Ikea own power outlet series “Koppla”. At some of the desks we dont have these outlets. Instead of having blank openings, i designed a tight fit cover panel to…

Order a print of this model

Printables

Order a print of this model

Printables

Koppla bracket with cutout

added a cutout to allow better reeling up of the cable

Order a print of this model

Printables

Holder for Ikea Koppla

Printed from PLA, two 4mm screws for mounting to the desk / cabinet Print instructions: 0.2 layer 0.6 nozzle 5 perimeters or 100% infil from 3mm height to the top supports (idealy breakaway with 0 top clearance, top interface pattern…

Order a print of this model

Printables

IKEA KOPPLA 6 ways EU socket support for 80x40 aluminium extrusion

I've simply print it with the default PLA 0.2 profile for the MK3S on Prusa Slicer. Support needed. The screw hole diameter are 8mm.

Order a print of this model

Printables

Skadis holder für Ikea Koppla power strip

Another version of a Koppla mount for Skadis. I needed a flat bottom and holes for M2.5 Socket head screws. Designed for use with the Skadis T-Nuts Mounting System for Ikea Skadis Pegboards with M2.5 screws (Perfect: M2.5x12 SHCS).

Order a print of this model