1 / 5
IKEA Koppla Mount brackets for Table Back
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a Koppla at the side of a plate. Koppla remains removable! Pull up the side with the cable and slide it out!
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 494
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Print laying on the side without support structures. That way the part is the strongest
I printed it with 5 Walls and 6 top and bottom layers; 20% infill.
To attach it I used 4.5x16 mm Wood screws. You can also use longer ones depending on your installation case.
Mounting order:
- First mount the closed bracket with 3 Screws
- Then insert the Koppla
- Push the second bracket (cable side) against the Koppla
- Mount the second bracket with 3 screw
- Now you can remove the Koppla by pulling up the cable side if you want to do so