Ikea KOPPLA fasteners for beam 30x30
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple thing to attach an ikea copla power socket to a 30x30 bed beam
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
A simple thing to attach an ikea copla (60412017) extension to a 30x30 bed beam. There are ovtersts for two M3 bolts at the top, which can be attached via a fusible sleeve or via a nut on the opposite side.
Designed for printing without supports. It must be printed with 100% fill (it is better to set the number of perimeters to 10 than to rely on fill). Low fill values are likely to break when trying to put on the beam by sliding the legs apart. You can try to reinforce the joint with a full fill modifier if you want to save time or plastic.
Modeled in Fusion360, not very parametric, but you can change the dimensions.