IKEA KOPPLA extension cord mount for IKEA SKADIS pegboard
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.26 – €1.54 net (excluding VAT)
For file: KOPPLA_SKADIS_mount_R_0.2mm_PETG_MK3S_1h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.40 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.57 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This mount allows you to place your IKEA extension cord anywhere on the SKADIS pegboard without using glue or screws
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 119
- Makes
- 2
- Views
- 2,485
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount allows you to place your IKEA KOPPLA extension cord anywhere on the SKADIS pegboard without using glue or screws. It is based on an amazing model made by Cunfusu which I found on Thingiverse (https://www.thingiverse.com/thing:4328325) I have utilized mounting points for KOPPLA and created suitable hooks for SCADIS.
Print instructions
I have used a standard profile for PETG, 0,2 mm layer height, 2 perimeters, 15% grid infill and enabled support material (it seems to be strong enough but you may use more perimeters just to be sure).
In my experience, it is best to position the mounting plate vertically on the long side. For one KOPPLA you will need one mount piece (left or right) and one pin to secure it.
Installation
Push the mounting plate into existing slots in the KOPPLA extension cord, then slide the plate in place (it is a tight fit). Use the pin to secure everything.