1 / 4
IKEA KOPPLA extension cord mount for IKEA SKADIS pegboard — zdjęcie 1
1 / 4

IKEA KOPPLA extension cord mount for IKEA SKADIS pegboard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mount allows you to place your IKEA extension cord anywhere on the SKADIS pegboard without using glue or screws

Ocena
5 / 5
Polubienia
33
Pobrania
119
Wydruki
2
Wyświetlenia
2485
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This mount allows you to place your IKEA KOPPLA extension cord anywhere on the SKADIS pegboard without using glue or screws. It is based on an amazing model made by Cunfusu which I found on Thingiverse (https://www.thingiverse.com/thing:4328325) I have utilized mounting points for KOPPLA and created suitable hooks for SCADIS.

Print instructions

I have used a standard profile for PETG, 0,2 mm layer height, 2 perimeters, 15% grid infill and enabled support material (it seems to be strong enough but you may use more perimeters just to be sure). 

In my experience, it is best to position the mounting plate vertically on the long side. For one KOPPLA you will need one mount piece (left or right) and one pin to secure it. 

Installation

Push the mounting plate into existing slots in the KOPPLA extension cord, then slide the plate in place (it is a tight fit). Use the pin to secure everything.

Tagi