Router Template – Flush Trim Jig for IKEA Koppla Power Strip (Desk Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable router template for cutting an exact hole in your desk to recess or mount the IKEA Koppla power strip
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Want to mount your IKEA Koppla power strip flush into your desk for a clean, built-in look? This router template lets you rout the exact opening needed — no guesswork, no sloppy cuts, just a perfect fit every time.
This template is split into two identical pieces to fit a standard print bed. Print the file twice and link the two parts together using the alignment features before securing to your desk.
What's included:
Two-part router template (one piece printed twice, then linked together)
Alignment triangles to help position and connect the two parts correctly
Registration marks to verify correct print size before cutting
What you'll need:
A router with a flush trim bit (top- or bottom-bearing)
Double-sided tape to secure the template to your desk (this is what I used — works great)
A jigsaw to remove most of the material before routing
How to use:
Print the template in a heat-resistant filament (see material note)
Print the file twice and link the two parts together using the alignment features
Use the alignment triangles to position the assembled template correctly on your desk — line them up with your marked centerpoint or reference lines
Secure the template firmly with double-sided tape
Use a jigsaw to cut away most of the material inside the opening, staying well within the line
Rout along the inside edge of the template with a flush trim bit for a clean, precise final fit
Clean up and test fit your IKEA Koppla
Attach your Koppla using my Koppla underside mounts.
Fits: IKEA Koppla power strip
Works for: Desks, tabletops, and panels
⚠ Material Note – Print in a Heat-Resistant Filament
The bearing of a flush trim router bit can get hot during use, especially on longer cuts. Printing this template in PLA is not recommended — it may soften or deform, throwing off your cut.
Recommended materials:
ABS – good heat resistance, widely available
PETG – easier to print than ABS, decent heat tolerance
ASA – excellent heat resistance, great if you have it
Avoid PLA unless you work in very short passes and let the bearing cool between them.