RC Raceboat Mini Basher 450 Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very fast RC Mono Race boat. Fully 3d printed. Easy to print, easy to assemble
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 823
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Get the STLs here: https://cults3d.com/:2176763
Very fast RC Mono Race boat. Fully 3d printed. Easy to print, easy to assemble.
A 3d printable Propeller is also included.
The boat handles quite agile. It has self-rightening in case you flip it over. There is a seal integrated for easy open and close with a single thumbscrew.
First speed tests were about 50-60 km/h
You can build the boat well under 100€.
I made a detailed build guide, including the bill of materials
https://drive.google.com/file/d/1H91f-3cMxoJEyr9z8fsSW_c0ubI6XaRQ/view?usp=sharing
Build guide video
https://youtu.be/fOWdJexgfuM
Drive video
Coming soon
Technical data:
Length: 560 mm
Width: 138 mm
Weight: ~850g (take-off weight)
Battery: 3s LiPo up to 2200mAh
Motor: 2940 water-cooled
Power: ~800W or even more if you dare 😊
ESC: ~ 60 Amp
Needed filament: ~750g PLA. + 50g PETG or ABS for Motor mount
Needed printer size: 180x180x180mm
Instagram:
https://www.instagram.com/bash_tech_
Also check out my other creations.
If you have any questions, feel free to ask. I'm quite active here.