RC Raceboat Mini Basher 450 Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very fast RC Mono Race boat. Fully 3d printed. Easy to print, easy to assemble
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 64
- Makes
- 0
- Views
- 824
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Get the STLs here: https://cults3d.com/:2176763
Very fast RC Mono Race boat. Fully 3d printed. Easy to print, easy to assemble.
A 3d printable Propeller is also included.
The boat handles quite agile. It has self-rightening in case you flip it over. There is a seal integrated for easy open and close with a single thumbscrew.
First speed tests were about 50-60 km/h
You can build the boat well under 100€.
I made a detailed build guide, including the bill of materials
https://drive.google.com/file/d/1H91f-3cMxoJEyr9z8fsSW_c0ubI6XaRQ/view?usp=sharing
Build guide video
https://youtu.be/fOWdJexgfuM
Drive video
Coming soon
Technical data:
Length: 560 mm
Width: 138 mm
Weight: ~850g (take-off weight)
Battery: 3s LiPo up to 2200mAh
Motor: 2940 water-cooled
Power: ~800W or even more if you dare 😊
ESC: ~ 60 Amp
Needed filament: ~750g PLA. + 50g PETG or ABS for Motor mount
Needed printer size: 180x180x180mm
Instagram:
https://www.instagram.com/bash_tech_
Also check out my other creations.
If you have any questions, feel free to ask. I'm quite active here.