1 / 1
Ramp to floor extension for Hot Wheels Ramp and Start Gate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes the non-elevated ramp to go to the floor instead of connecting to hot wheels tracks
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 1214
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (56)Powiązane
My kids use a makeshift ramp to drag race hot wheels across the living room floor. Wanted to print them a ramp but the one here is meant to connect to hot wheels track so I designed this piece that will connect to the bottom of the non-elevated ramp to make it go to the floor instead of connecting to hot wheels tracks.
Print as is with a low layer height to minimize stair stepping. Supports for the connectors may be needed depending on your printer.