16A CEE Socket for Cable-Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CEE socket backplate for cable-tray mounting
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quickly designed this to have a rigid frame for CEE sockets to nicely sit in a cable-tray. Though I was using cheap cable-tray and inserts, I'm quite sure it should fit most manufacturers that use the following dimensions:
Outside measurement of the CEE socket: 75x75mm
Mounting distance of the four screws: 60x60mm
Screw-hole diameter: 4.5mm
Printed it from PLA cause I had no white PETG flying around, would suggest PETG though. Use a gasket (mine was provided with the CEE socket) & remember that you won't get a dime out of any insurance if something was to happen.