1 / 1
16A CEE Socket for Cable-Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CEE socket backplate for cable-tray mounting
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Quickly designed this to have a rigid frame for CEE sockets to nicely sit in a cable-tray. Though I was using cheap cable-tray and inserts, I'm quite sure it should fit most manufacturers that use the following dimensions:
Outside measurement of the CEE socket: 75x75mm
Mounting distance of the four screws: 60x60mm
Screw-hole diameter: 4.5mm
Printed it from PLA cause I had no white PETG flying around, would suggest PETG though. Use a gasket (mine was provided with the CEE socket) & remember that you won't get a dime out of any insurance if something was to happen.