Rat Rig Toolhead 1.0 - Beacon mount with frame-safe cable routing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A twist on the back of the Rat Rig Toolhead 1.0 for stable cable routing away from pinch areas.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The “not yet official but made by someone associated with Rat Rig” V-Core 3.1 Toolhead 1.0 ducts/back, for mounting a Beacon, did not work for me. Super small zip tie channels for hard-to-source zip ties, and sharp bends to miss the back frame, were not appealing to me. So, I made my own, with the space to tuck in the lock of a standard zip tie on the bottom (to minimize the profile) and two cable ties on the side to minimize flexing. Also, now fits 1mm thick zip ties. Should print in place just the same as the original RR toolheads. Uses the same ducts as the linked model I remixed, so print those for this.
Ignore my cable routing, or lack thereof, and poor quality photos: Still finishing my rebuild of the printer and not exactly running a photo shoot here.
v2 uploaded with smarter zip tie points.