BambuLab build plate magnetic wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple magnetic wall mount for BambuLab build plates (P1/X1)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A very simple wall mount for BambuLab build plates using inserted magnets.
You can choose either 10x2mm magnets or 6x2mm magnets.
To place the magnets, you need to set a pause at layer 16.
For a single plate you just need the two smaller pieces. For more than 2 you need one bigger piece per plate as well.
Attention:
I've added 0.2mm to the diameter and height of the magnet holes. They should snap fit. Please try one model first and take a close look on the inserted magnet. It shouldn't be higher than the rest of the model if inserted correctly. If it's higher, stop the print and check your tolerance settings! You can damage your nozzle if the magnet sticks out too much!