MKS Monster8 triple fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses 40XX fans to keep stepper drivers and MCU on an MKS Monster8 cool
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Allows mounting three 40XX fans (40mm fans of any thickness) to cool stepper drivers, as well as the MCU, on an MKS Monster8 board. The fan mounting holes are designed for heatset inserts, and there are also through holes for zipties and cable management.
What you need
- M3 heatsets (diameter 5, length 4) x12 (for fan mounting)
- 40XX fan x 3 (dual-ball 4010 recommended)
- M3 x12 (for fan mounting, any cap style, you want +2-4mm relative your fan thickness)
- M3x35mm aluminium spacers x4 (for mounting to the board, can stack shorter ones instead)
- M3x8mm x4 (for mounting part to spacers, any cap style)
Dimensional notes
This assumes fans with ~32mm mounting hole spacing, and a fan aperture of ~38mm. The ziptie holes are ~4mm x ~2mm, which should fit most zipties. The through hole for wire management is 10mm in diameter.
The spacers suggested above are typical: you may need shorter or longer ones depending on clearances.