Sturdy blank 1U ventilation panel for 10 inch rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sturdy 1U ventilation panel for your 10 inch rack with some hexagonal holes for extra cooling performance!
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 394
- Wydruki
- 1
- Wyświetlenia
- 1589
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
-------------------------------------------------------------------------------------------------
UPGRADED PARTS INCOMING!
I've done my own fair share of testing with this part, and I figured a major redesign might improve it a lot:
- Adding more material to the mounting “ears”, to reduce flex when screwed in
- Reducing the screw-hole length
- Elongating the “frame” to 21.5mm
- Adding support beams from corner to corner to reduce flex even further
- Adding more chamfers for sturdyness
The link to the new parts will be shared HERE: <lorem.ipsum.com>
-------------------------------------------------------------------------------------------------
This is a sturdy 1U ventilation panel for your 10 inch rack with some hexagonal holes for extra cooling performance*!
It's designed to have minimum flex while also using little material, so the front of your rack can be supported or even held together with these panels only.
Mounts with regular M6 cage nuts.
| Material | PETG, ABS |
| Layer height | .2mm or any |
| Raft | nope |
| Supports | nope |
| Infill | 20%, gyroid |
| Print surface | powder-coated steel for nice finish ;) |
* Disclaimer: hexagonal holes are not actually increasing cooling performance, despite the claims of the creator of this model.