Tasimo pod dispencer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Tassimo dispenser for your coffee, hot cholate pods, simple yet effective.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Tassimo dispenser for your coffee, hot cholate pods.
It can take the full carton of 8 right to the top.
On the rear is two m3 screw mounts so you can mount it to a cupboard.
Alternatively you can download the strap and attach 4 in a row and hang them once
Once I work on a lazy suzy option I will upload this also.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 V3 KE
No
Supports:
Yes
1.6
Infill:
15
Notes:
I used manual tree support on the overhang on the front, other than that it should be good a good print, if you want to adjust the seams to make it look nicer then this would be recommended as mine ended up on the outside in places.
Category: Kitchen & Dining