1 / 7
K1 & K1Max Cartographer3D Mount for Booty Carriage — zdjęcie 1
1 / 7

K1 & K1Max Cartographer3D Mount for Booty Carriage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for Eddy Current Bed Level Sensor for Booty Carriage.

Ocena
0 / 5
Polubienia
14
Pobrania
59
Wydruki
0
Wyświetlenia
1250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

BOM:

1x - Cartographer Flat Pack

2x - M2 Nylon bolt (50pcs M2 M2.5 M3 M4 Black White Nylon Plastic Phillips Pan Head Cross Round Screw Bolt length 5mm-50mm - AliExpress 13)
4x - M3 Heat Inserts 
4x - M3x8 
26-30 AWG stranded silicone wire

 

Note: This model places the PCB above the coil in the prohibited area. The use of plastic screws for fixing the cover is recommended. The cover is not strictly necessary, you can also mount it without it.
I extensively tested the reliability of the measurements and found no problems. I take no responsibility for any nozzle collisions on the plate.

 

 

Tagi