1 / 2
Stoßfänger für Wandpaneel - Door Bumper for Acustic Wall Panel — zdjęcie 1
1 / 2

Stoßfänger für Wandpaneel - Door Bumper for Acustic Wall Panel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dies ist ein Stoßfänger zum Einlassen in Wandpanelle zur Vermeidung hässlicher Macken durch Türgriffeinschläge.

Ocena
0 / 5
Polubienia
16
Pobrania
64
Wydruki
0
Wyświetlenia
1076
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dies ist ein kleiner Stoßfänger zum Einlassen in Wandpanelle zur Vermeidung hässlicher Macken durch Türgriffeinschläge. Einfach in die Panelle leicht eindrehen, sodass die Kanten der Füße unter das Holz gleitet, und bei Bedarf mit ein bisschen Klebstoff fixieren. 

Die Wandpaneele sollten etwa folgende Maße haben: 

  • 12 mm Lamellenstärke
  • 25 mm Lamellenbreite
  • Lamellenabstand 15 mm

Ich empfehle es mit 30% Infill und 3D-Wabenstruktur aufrecht zu drucken. “Brücke” bei Bedarf stützen. 

----------------------------------------------------------------------------------------------

This is a small bumper for inserting into wall panels to prevent ugly dents caused by door handle impacts. Simply screw into the panel slightly so that the edges of the feet slide under the wood and fix with a little glue if necessary.

The wall panels should have the following dimensions:

  • 12 mm slat thickness
  • 25 mm slat width
  • Slat spacing 15 mm

I recommend printing it upright with 30% infill and 3D honeycomb structure. Support the "bridge" if necessary.

Tagi