Stoßfänger für Wandpaneel - Door Bumper for Acustic Wall Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dies ist ein Stoßfänger zum Einlassen in Wandpanelle zur Vermeidung hässlicher Macken durch Türgriffeinschläge.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 64
- Makes
- 0
- Views
- 1,076
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dies ist ein kleiner Stoßfänger zum Einlassen in Wandpanelle zur Vermeidung hässlicher Macken durch Türgriffeinschläge. Einfach in die Panelle leicht eindrehen, sodass die Kanten der Füße unter das Holz gleitet, und bei Bedarf mit ein bisschen Klebstoff fixieren.
Die Wandpaneele sollten etwa folgende Maße haben:
- 12 mm Lamellenstärke
- 25 mm Lamellenbreite
- Lamellenabstand 15 mm
Ich empfehle es mit 30% Infill und 3D-Wabenstruktur aufrecht zu drucken. “Brücke” bei Bedarf stützen.
----------------------------------------------------------------------------------------------
This is a small bumper for inserting into wall panels to prevent ugly dents caused by door handle impacts. Simply screw into the panel slightly so that the edges of the feet slide under the wood and fix with a little glue if necessary.
The wall panels should have the following dimensions:
- 12 mm slat thickness
- 25 mm slat width
- Slat spacing 15 mm
I recommend printing it upright with 30% infill and 3D honeycomb structure. Support the "bridge" if necessary.