1 / 5

12v LED Spotlight Holder, Wall Mount

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

With this you can use the cheap 12v spots on a random wall, any height you like, instead of fixing them on the ceiling.

Aktualizacja u źródła: 1 lis 2024

Informacje o modelu

I made a simple wall holder for led Spots, tilted at 10 degrees, check the image for the type of Spots used.

it is meant to be fixed with 3 5mm screws, and has a built in cable channel for a tidier look.

inner diameter: 59mm, should fit a 58mm very snugly.

use a bit of heat if too tight :)

I used these, but I cannot really speak for their durability or such:

Update:

the v7 model is updated for tighter tolerances, the older model fits but the particular spots I had seem to be smaller than advertised.

I also made the cable channel larger, it was a pain to get it through the first iteration.

I attached also the fusion files, in case you want to adapt.

Enjoy :)