12v LED Spotlight Holder, Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this you can use the cheap 12v spots on a random wall, any height you like, instead of fixing them on the ceiling.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I made a simple wall holder for led Spots, tilted at 10 degrees, check the image for the type of Spots used.
it is meant to be fixed with 3 5mm screws, and has a built in cable channel for a tidier look.
inner diameter: 59mm, should fit a 58mm very snugly.
use a bit of heat if too tight :)
I used these, but I cannot really speak for their durability or such:
https://www.ebay.de/itm/355016866706
Update:
the v7 model is updated for tighter tolerances, the older model fits but the particular spots I had seem to be smaller than advertised.
I also made the cable channel larger, it was a pain to get it through the first iteration.
I attached also the fusion files, in case you want to adapt.
Enjoy :)