Cooling Fan Mod for Toshiba Portege R830
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two parts to raise the cooling fan of the Toshiba Portege R830 and improve the cooling by 5°C.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Old laptop but still valuable for office or programming. It suffers since the beginning from overheating due to a poor design of the cooling system.
But actually, it can be improved greatly by raising the fan height.
Indeed, 25-30% of the fan duct is blowing on the edge and under the motherboard. Design flaw ! (the design is already not cooling efficient from the start…)
With the parts in this design, you will raise the fan by 5mm so that almost 100% of the fan duct will blow on the cpu and heatsink.
Results: in my case I've reduced by 5°C the temperature of the cpu.
In addition, I encourrage you to change the thermal paste and clean the fan and heatsink.
To print the part, I recommend using TPU.
You will also need 2x M2.5x8 screws.