1 / 2
Cooling Fan Mod for Toshiba Portege R830 — image 1
1 / 2

Cooling Fan Mod for Toshiba Portege R830

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two parts to raise the cooling fan of the Toshiba Portege R830 and improve the cooling by 5°C.

Rating
0 / 5
Likes
0
Downloads
14
Makes
0
Views
87
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

Old laptop but still valuable for office or programming. It suffers since the beginning from overheating due to a poor design of the cooling system.

But actually, it can be improved greatly by raising the fan height.

Indeed, 25-30% of the fan duct is blowing on the edge and under the motherboard. Design flaw ! (the design is already not cooling efficient from the start…)

With the parts in this design, you will raise the fan by 5mm so that almost 100% of the fan duct will blow on the cpu and heatsink.

Results: in my case I've reduced by 5°C the temperature of the cpu.

In addition, I encourrage you to change the thermal paste and clean the fan and heatsink.

 

To print the part, I recommend using TPU.

You will also need 2x M2.5x8 screws.

Tags