1 / 8
Bosch Unlimited Series 6 Vacuum repair BCS611 maybe 7 and 8th series — zdjęcie 1
1 / 8

Bosch Unlimited Series 6 Vacuum repair BCS611 maybe 7 and 8th series

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My bosch 6th series vacuum brush has snapped. The part that allows it to rotate broke. f3d file included

Ocena
0 / 5
Polubienia
6
Pobrania
62
Wydruki
0
Wyświetlenia
864
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My bosch 6th series vacuum main brush has snapped. The part that allows it to rotate broke. I included the f3d file in case you want to make some improvements. I did my best to create some placeholders of some of the parts.

The V1 had to be adjusted. I used a dremel for that. I modified the V2 to fix those issues and I also made it bigger, hoping I can glue it to the part next to it. I am planning to print the V2 in ASA soon, then glue it to the part next to it(the one that sits on top of the rotating brush). It should fit just fine, but you must know it isn't tested yet. I marked the side that sits on the brush side so it;s easier to orientate it. 

 

Depending on how your part broke off, you may need to cut some bits of the plastic part that covers the brush(the one that's already damaged)

 

  • V1 - initial design. needed adjustments
  • V2 - requires grinding the top cover. increased the screw holes size and cut some of the edges. made it bigger to increase surface for the glue - needed adjustments
  • V2.1 - added chamfer to some of the edges - needed adjustments
  • V2.2 - removed the chamfer and adjusted some of the edges for some slack

 

 

Tagi