1 / 4
LTT Screwdriver Case (multi-material and multi-colour)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the LTT Screwdriver with PiP multi-material hinges, embedded magnets, and compatibility with standard bits
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- GNU General Public License v3.0
This is case for the LTT Screwdriver with print-in-place multi-material hinges.
The tolerance of the hinge is designed for PLA-PETG interface. It will not work with a single material print, as the hinge part will get stuck together. For single material print, please refer back to the original model, by Andy-g6zyd.
Print guide:
- Print orientation:
- As giving in the ".step" files
- Resolution:
- 0.2 mm
- Infill:
- 20%
- Walls:
- 3 or 4
- Filament:
- PETG is recommended for everything except the spacers
- PLA spacers and supports (see the included pictures)
- Brim:
- No
- Pause: At 7 mm, to insert 12 off 6x3mm magnets
Notes:
- Some spray-on lubricant would help the hinge move smoothly.
Donate to my coffee fund: