1 / 4
LTT Screwdriver Case (multi-material and multi-colour)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the LTT Screwdriver with PiP multi-material hinges, embedded magnets, and compatibility with standard bits
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 20
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- GNU General Public License v3.0
This is case for the LTT Screwdriver with print-in-place multi-material hinges.
The tolerance of the hinge is designed for PLA-PETG interface. It will not work with a single material print, as the hinge part will get stuck together. For single material print, please refer back to the original model, by Andy-g6zyd.
Print guide:
- Print orientation:
- As giving in the ".step" files
- Resolution:
- 0.2 mm
- Infill:
- 20%
- Walls:
- 3 or 4
- Filament:
- PETG is recommended for everything except the spacers
- PLA spacers and supports (see the included pictures)
- Brim:
- No
- Pause: At 7 mm, to insert 12 off 6x3mm magnets
Notes:
- Some spray-on lubricant would help the hinge move smoothly.
Donate to my coffee fund: