KornerClock - wall clock for the corner of the room
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
wall clock for the corner of the room
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Standard Digital File License
This is an unconventional wall clock for the corner of the room or desk.
Update: 8/22/2024 - Added a minute hand that is capped off in the center for those who wish to complete this model without the second hand.
The clock body can be printed in multi-color or one solid color. In Prusa slicer, just separate it out in to parts and assign color for the hour markings.
Nozzle = 0.4 for the clock body, hour and minute hands
Nozzle = 0.25 or 0.2 for the second hand but can be done with 0.4 nozzle but may need a some testing and tweaks to print properly. Or use a heated push pin to clear the hole. Or use the round cap that comes with the clock mechanism.
Clock mechanism - works with this one or this one from Bambulab.
Support - yes only on the clock body.
Layer = 0.2
Bottom layer pattern = concentric will give a very nice texture, but this is purely a personal taste.
Will need one or two Command strips like these. One will hold just fine too :)
Note: the second hand will be challenging to print, I personally printed with 0.4 nozzle then used a heated push pin to clear the hole it mounted just fine.