1 / 5
KornerClock - wall clock for the corner of the room — image 1
1 / 5

KornerClock - wall clock for the corner of the room

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

wall clock for the corner of the room

Rating
0 / 5
Likes
10
Downloads
31
Makes
0
Views
198
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Standard Digital File License

This is an unconventional wall clock for the corner of the room or desk. 

Update: 8/22/2024 - Added a minute hand that is capped off in the center for those who wish to complete this model without the second hand.

The clock body can be printed in multi-color or one solid color.  In Prusa slicer, just separate it out in to parts and assign color for the hour markings.

Nozzle = 0.4 for the clock body, hour and minute hands

Nozzle = 0.25 or 0.2 for the second hand but can be done with 0.4 nozzle but may need a some testing and tweaks to print properly. Or use a heated push pin to clear the hole. Or use the round cap that comes with the clock mechanism.

Clock mechanism - works with this one or this one from Bambulab.

Support - yes only on the clock body.

Layer = 0.2

Bottom layer pattern = concentric will give a very nice texture, but this is purely a personal taste.

Will need one or two Command strips like these. One will hold just fine too :)

Note: the second hand will be challenging to print, I personally printed with 0.4 nozzle then used a heated push pin to clear the hole it mounted just fine. 

Tags