Ender 3 V2 X Gantry Ribbon Organiser Clip For Sprite Pro Extruder Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small clip for Ender 3 V2 to hold the ribbon cable coming from the Sprite Pro in place where the Extruder motor was.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Upgraded my Ender 3 V2 to the Sprite Pro extruder recently and was disapointed with how the cable fell. Started off with a ziptie holding it in place so it wouldn't interfere with prints while I was printing.
Hopped into Fusion 360, made 3 versions of this when I finally settled on this version.
Attaches to the mounting bracket where the extruder motor was formally with:
- 2x M3*8 Bolts
- 2x M3 Standard Nuts
- (Optional) Ziptie
The Ziptie hold is just to keep it a bit more secure if you're paranoid like me.
Seems to work well for me, if you require any changes or have any feedback I'm open to it!
4 Files are listed below:
- 2 are with my initials (3MF and STL)
- 2 have no initials labeled “noLogo” (3MF and STL)
Printing instructions:
Simply print on the side so no supports are required.
Use whatever settings you really like, I used my usual 0.2 layer height and it worked out just fine.
Material:
I'm sure PLA would do the job but I used Elegoo PLA+. This is due to a couple reasons:
- I like the colour and it matches the rest of my printer.
- It's a tiny bit less brittle so it has less chance of breaking.
- I really like the colour.
Thank you!