HoverAir X1 Flex Protective Boot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist, ‘flex’ light-weight protective boot for a HoverAir X1
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a, light-weight minimalist protective boot for a HoverAir X1. The X1 conveniently slips into a large pocket, pointless having a boot that reduces this convenience. Made from 83 shore TPE, it is 1mm thick (but with an extra 1mm protection at the edges). Fill is gyroid 20%, deliberately not solid to provide impact absorption and protect the drone. The top of the boot is open because the top of the drone is effectively a solid side. The boot does come up beyond the drone top surface to give protection. The only post processing required is to cut through the flexible clip [print] retainers with a scalpel (put in place to aid accurate printing and a close fit).
Prints right way up with no support.
See also: HoverAir X1 ProMax protective boot.
HoverAir X1 ProMax Protective Cover by Rosti | Download free STL model | Printables.com
See also: HoverAir X1 spare battery, protective boot.
HoverAir X1 spare battery protective boot by Rosti | Download free STL model | Printables.com