Festival Fan Wall Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mount to display the hand fans you buy at festivals.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I spent way too much time completely modelling out one of these hand-fans, so I could build this mount around it.
There's a bigger and smaller version; the bigger version holds it more securely, but takes longer to print and is more visible. The smaller holds the fan a bit less tightly, but is quicker to print, and less noticeable.
For me, the large one takes 59 minutes to print, whereas the smaller one takes 47 minutes.
Both have a variation with clearance for screws up to 5.5 mm. The “standard” variation of both has a clearance for screws up to 4.5mm.
All pictures show the bigger version.