1 / 6
Zero-G Mercury One Eva 2.4 Dual 5015 Owl Eyes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual 5015 Owl Eyes fan mount/backplate for Zero-G Mercury One
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
I wanted to have dual 5015 fans on my printer but didn't want to change over to EVA 3 due to the added bulk and weight, so I designed this. Installation is straightforward, and the toolhead can stay mounted on the printer while you change out the backplate. Uses 8 heatset inserts for mounting, and relocates the wires to the center.
Print with or without supports using Zero-G recommended settings.