1 / 3
D200 Air Purifier Mounting Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount bracket so you don't need to re-tape/mangle your plenum every time you replace the bulbs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Purpose:
The bulbs in photocatalytic air-purifiers need to be replaced about once a year even if they still light up at that time (the light they emit will go out of phase & they'll stop functioning).
Rather than ripping up your plenum every time & having to re-tape everything, this bracket allows you to replace the bulbs quickly/easily.
The files I've uploaded are a newer version that fixes the issues with the one I printed for myself.
Supplies needed:
- 1x D200 air purifier
- Foil tape (the type used for duct-work)
- A few ft of .5in x .25in foam weather stripping (the cheap open-cell type would probably work best)
- 1x Printed [D200 Mounting Bracket_V2]
- 4x Printed [D200 MB Lock_V2]
- 4x M3x5 bolts (length doesn't matter so much --just need long enough)
- 4x M3 nuts
- 8x M3 washers
Instructions:
