Liczymy pasujące modele…
Dieses schräge Gehäuse für ein 20×4 LCD Display (LCD2004) wurde für eine komfortable Ablesbarkeit bei der Montage auf Projektboxen, Steuergehäusen und Bedienfeldern entwickelt. Durch die angewinkelte Position des Displays lässt sich die…
I've designed a compact gobo projector that is compatible with Godox V1, AD100 PRO, AD200 PRO flash with the H200R round head. I needed something portable when I'm On-Location. No supports needed if printed like shown on the pictures. I…
I designed a 20° and 30° honeycomb grid compatible with the Godox AD200 / V1 flash and the AK-R1 kit - that actually works. The included grid in the AK-R1 kit is a joke and does not work very well creating a small soft spot light. Be…
Ulanzo D200-D200H Stand
non-return valve for ventilation pipe diameter 140 mm and 200 mm
After a mere 18 months, the inner ring on my Maono podcast mic's chock mount snapped (I suspect the cat was grooming himself against the mic). This is the replacement I made, which is a little thicker than the original, and does not use…
This is for resin printing only! If you want to print it with FDM check out my other honeycomb grid here: https://www.prusaprinters.org/prints/128513-diy-honeycomb-grid-godox-ad200-v1 10°, 20° and 30° honeycomb grid compatible with the…
This project is a slide projector for the Godox round head of the AD200 flash. I print with PETG for decent strength and temperature resistance. PLA would probably be problematic. I printed it with full supports, 0.2 mm quality setting on…
I want more colorgels for my AD200 with the H200R round head. So i designt this magnatic version to easily mount self cutted 67mm diameter colorfilters or the round Rogue lightning filters. Print bouth parts and glue 2-4 magnets, round…
A small control box mounts an Arduino Uno, an LCD2004A display, and a KY-040 rotary encoder. Internally, the box features mounting points for all three boards and cutouts for a panel mount push button switch, a panel mount power switch, a…
A device for fast-rewinding the filament with a screwdriver. Made for standard D200 coils with a depth of 65mm and an inner diameter of 53mm. The cartridge on the shank is 13mm, the outer diameter of the cartridge is 43mm. The difference…
A simple design to hang your wire cutters on your Honeycomb Storage Wall, without taking up too much plastic or space. Sorry about the cover photo; I'm still printing more parts for my HSW, I'll update it once it's all printed, assembled…
Ulanzi Stream Deck D200Hのチルトスタンドです。 ボタンの下側の文字が見にくいので角度を10度つけれるスタンドです。 2025/10/30追記 ゴム足の溝が浅く本体が滑ってしまうことが多かったので、溝を深くした改善バージョンを追加しました。 モデル名：250919_Ulanzi_D200H_stand v3_0.4 2025/11/10追記 プリントの方向がわかる画像をPhotosの7枚目に追加しました。参考にして下さい。 Tilt Stand…
This is a case to mount GODOX AD200 PRO on a pole. Although the distance between the head and the main body can be separated using the EC200, I made a simple case to fix the main body to the pole. The pole and the case are fixed with a…
Stand pour SkyRC D100 / D200 NEO. Le chargeur chauffe beaucoup, je conseille d'imprimer en ABS/TPU. Pièces imprimées sans supports.
Dear all, please see the instructions at https://www.verdrahtet.info/2019/01/04/homematic-statusanzeige-selbst-genaut/ Thanks to Stefan for this project. There will be some options: with switch / without switch (already here) version with…
Overview Two part, threaded holder that uses 3x3 mm magnets to snap colour-correction gels onto Godox round heads. Sized for gels cut to Ø 70-71 mm. Compatibility Godox AD100 Pro Godox V1 (all mounts) AD200/AD200 Pro with H200R round head…
This is a case to mount GODOX AD200 on a pole. Although the distance between the head and the main body can be separated using the EC200, I made a simple case to fix the main body to the pole. The pole and the case are fixed with a band.…
Print with TPU (or other flexible filament), no supports required.
ENG: i didn't like the original piping that came with these filters. even extended it's to short for most of my aquariums. also I didn't like the air hose connector on the top. with one of these adapters you can connect 20mm piping to a…
Support for aluminum profile, require M6 bolt
A friend was facing replacing a whole Navico Wind Direction and Speed system on his 30 year old sailboat because he was unable to find a replacement wind cup. So I reverse engineered the hub, cap, and cups for the Navico System 200 WD200.…
A simple case remix, that uses the multiconnect system to mount to a multiboard, and potentially other board systems as well. Should fit generic LCD2004 lcd modules that are common, along with the i2c board on the back.
Dust/drive cover for the Inateck FD2002 docking station, fitting 2x3.5in drives. Will fit other docking stations having a slot-to-slot distance of 41mm (+/-0.5mm tolerated), drive protrusion of 10-11cm (some models from sharkoon seem…
This is a 3D model of the rubber base cover of the Nikon D200. You can also find the part as a step/fusion file in the attachments, if you want to modify or remix it.
Allows an umbrella or other shaft-based light modifiers to mount directly to one of the two ¼-20 tripod points on an AD200. I've included the “short” version in case somebody wants it, but the one marked “long” is a big improvement in…
This requires 3x4mm+1x3mm banana plug, which shoud not come with any grip.
Remove the walls of the center piece in the slicer.
Print settings Choosing the Beam Angle This model uses PrusaSlicer's Honeycomb infill to generate the optical grid. Honeycomb grids can project wider or narrower beams depending on hexagon size and depth - see photos for reference (shot…
Re-purpose your old Anet A8 (or clone) PCB to display other information to you hearts desire. This model comes in three parts. The main case holds the LCD2004 PCB, held down by a bracket that also has holes for heat-set insert to affix…
In the making of an ToyRep i didn't find a good mounting for the lcd2004. So i found this lcdfront https://www.thingiverse.com/thing:1104999 by APineda and made som arms for the top threaded rod. Waiting for Ali to send the rest of my…
This user guide provides detailed instructions on how to properly install and secure the mounting base for the Siemens HMI TD200C. It includes step-by-step guidance on assembling the base, attaching the HMI unit, and ensuring stable and…
A case for the Eachine D200 FPV watch Printed at 0.2mm in PLA with Clear TPU used for the buttons.
Dirt Devil SD20020 Attachment_v2. I modified it to remove the small thingamajiggers on the tip that are sticking out after I printed what is in the pics. To get the final size, I loaded it in the slicer and only printed a few layers to…
Cajas de almacenamiento para rollos PLA de varios tamaños, también hay cajitas para almacenar el silicagel y placas identificativas del material y marca (las placas se unen a las cajas con imanes D8x1mm, estos se pegan con silicona…
you will need a Ni-MH/Ni-Cd battery charger, there are plenty cheap ones for RC cars. You will also need 2 uninsulated male spade connectors (standard size, roughly 6.3mm wide), hot glue or preferably epoxy to hold it in place, and wiring…
If the default stand's stem is too tall for you, this screw will allow you to mount the microphone directly to the base.
Tested on Denon AH-D2000 HiFi Headphones. Created to replace broken driver assembly / mount 3rd party driver into AH-D2000 housing. I know Denon is using a lot of Fostex parts, so it might work with Fostex headphones too. Careful with the…
The stock AD-E2 mount is not directly compatible with the EC200 extension cable head, so this adapter allows a secure mounting. Should be compatible with other cold shoe devices (not tested) Printing tips: No supports required Infill…
I was asked to make a Yamaha RD200 Airbox adapter for push fit rubber carb to airbox hoses. The Yamaha RD200 adapters apparently are not made anymore in the same way so these ones are as close to a like for like perfect fit as I could get…
THIS MODEL HAS NOT BEEN TESTED YET AND MAY HAVE SOME ISSUES This is a 1/2 scale of the ACA Hurricane 130 MKII blower assembly, made for Jared's 1/2 scale Hurricane model. In theory, this should output >56 CFM at 4 to 5 PSI , but it's…
Purpose: The bulbs in photocatalytic air-purifiers need to be replaced about once a year even if they still light up at that time (the light they emit will go out of phase & they'll stop functioning). Rather than ripping up your plenum…
This 3D-printable Vacuum Adapter for the Scorpion Quick Flip Corded Handheld is an efficient solution for using your handheld vacuum. Its compact design allows you to attach a different attachment so that you can add your favorite…
Aperture for GretagD200II density meter
Simple replacement battery cover the the Godox AD200 and 200 Pro, Will also work on the Pixapro version as hey are the same product. This should work in and filament. I used PLA
I made a shallower stand for the Ulanzi D200 stream deck because in my specific case I needed it to be less than 70 mm in height. The angle of the stand was reduced to 30 degrees which makes the total including the D200 about 68 mm. I've…
I was asked to make a Yamaha RD200 Airbox adapter for push fit rubber carb to airbox hoses. The Yamaha RD200 adapters apparently are not made anymore in the same way so these ones are as close to a like for like perfect fit as I could get…
