50mm FMS EDF to XFly shims
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shims for mounting a 50mm FMS EDF into an XFly channel
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 716
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
I was using a 50mm FMS EDF in the Skyray model published by PTIKyle. The FMS EDF has a narrower bell and a narrower body than the XFly units, resulting it in falling into the duct and not being sealed.
This is a quick shim set to make the FMS unit fit neatly.
The larger ring is glued to the entry throat of the duct, giving it the radius matching the XFly 50mm EDF.
The smaller thicker ring was simply pushed over the body of the FMS EDF and once again gave the body the same radius as the XFly unit.
Once these were installed, the FMS EDF sat flush and firmly inside the models.
A second version is included with a break in the body ring. This version will fit snug without any issue as the ring will expand to accommodate any duct size difference.