EV Charge cable holder for long cables - with removable divider for easy cable managment (Update: Also a Slim version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
This is is a cable holder with mount for the cable plug (see picture) for your EC home charger. It keeps the cable tidy and clean.
I printed mine with PETG since it is used outdoors. If exposed to a lot of sun I would recommend printing with ASA. In a garage etc. PLA should work just fine.
The divider can be easily mounted, just click in place, and should fit just so that it easily can slide, and you can adjust the two compartments for the cable. See pictures.
EDIT:
I have added a narrower version (after suggestion), with an extra hole at the top for mounting. It protrudes only 90mm from the wall, but the back plate is also thinner. I also dropped the charge plug holder as I am not really happy with the design of that.
I have not printed the Slim version, so it is un-tested. I choose to upload it anyway, in case someone wants to try it out.
EDIT2: Here is a link to a small and slim version (that looks better): https://www.printables.com/model/1417967-ev-charge-cable-holder-slimmer-version-no-supports
I am not sure how much of an issue it is with an EV cable (the blue one in the picture is from Tesla, and is properly beefy), but make sure to see it wont get too hot if parts of the cable is hanging on the wall while charging. I have no issue with heat on mine. You have to take your own precautions.
Stay safe!
PETG
0.32 mm layer height (0.4mm nozzle) You can go finer, 0.2mm layer height gives nicer finish.
4 walls
10% infill should do