1 / 6
Noctua NF-A14x25r G2 120 to 140mm mounting holes adapter brackets — zdjęcie 1
1 / 6

Noctua NF-A14x25r G2 120 to 140mm mounting holes adapter brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

fan mounting adapter brackets

Ocena
5 / 5
Polubienia
16
Pobrania
89
Wydruki
1
Wyświetlenia
1504
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When I saw the mounting for this fan I thought someone might wanted it to fit a 140mm bracket. So here they are. Took me about an hour to model (that's included the fan) and since the 1st test worked so good, I'll not be making any other revision for now.

You need 1 of each of the right and 2 of the left parts.

I've made 4 versions for different types of screws a version each for…
- those short self tapping PC fan screws that usually are included with the PC case
- M4 screw that self tap into the plastic
- M4 7mm nuts
- M5 8mm nuts


Some of the parts in files are the same.
Locker for fanscrew and M4tap are the same, and locker for M4nut and M5nut are the same, but the sides they go on are still left and right.

Update about an hour after publish time
I made a small bobo and forgot about the bracket near where the fan comes out, it needed to be a bit shorter. Its fixed and you need to print one of each of the files called "fanwire" and “not fanwire”

Tagi