Orbrium roundhouse track splitter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Orbrium roundhouse only came with a turntable style connector but I wanted a 5 way splitter instead.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
The Orbrium roundhouse only came with a turntable style connector but I wanted a 5 way splitter instead. There was a lot of trial and error since each brand has slightly different dimensions. The “track angle test” file is intended to let you use a minimal amount of filament to test if this file will work with your roundhouse before printing the whole piece.
I have to put the roundhouse on top of the track because of the doors- just as an fyi.
Let me know if you would like to see any modifications! With detailed dimensions I could probably make a custom one for your own roundhouse if you can't find one.
I printed with default settings (15% infill), and it took about 2 hours.